# Geotab

> Work with your Geotab fleet: vehicles and where they are, trips, GPS history, engine readings and fault codes, rule violations, zones, drivers' hours and messages to drivers.

App · 22 actions. Web page: https://docs.lodol.com/docs/integrations/geotab

## Actions

### Create zone

Create a circular zone (geofence) round a point, such as a customer site, for the whole organization or one group.

**Inputs**

- Name (`name`, text, required): The zone's name, shown on the map and in reports.
- Latitude (`latitude`, number, required): Latitude in decimal degrees, -90 to 90, such as 43.4383. From -90 to 90.
- Longitude (`longitude`, number, required): Longitude in decimal degrees, -180 to 180, such as -79.7123. From -180 to 180.
- Radius (metres) (`radius_m`, number, required): How far the zone reaches from the centre, 10 to 100,000 metres. From 10 to 100000.
- Type (`zone_type`, text): What the place is. Defaults to Customer. One of: `ZoneTypeCustomerId` (Customer), `ZoneTypeOfficeId` (Office), `ZoneTypeHomeId` (Home), `ZoneTypeVendorServiceCenterId` (Vendor service centre), `ZoneTypeInHouseServiceCenterId` (In-house service centre).
- Comment (`comment`, text): A note kept with the zone.
- Group (`group_id`, text): The group the zone belongs to. Defaults to the whole organization.
- Report stops here (`identify_stops`, true/false): Name the zone when a vehicle stops in it, which also adds a zone stop rule.

**Outputs**

- `zone` (object): The zone as created
- `zone_id` (text): The new zone's id

**Example output**

```json
{
  "zone": {
    "activeFrom": "2026-11-17T14:00:00Z",
    "activeTo": "2050-01-01T00:00:00.000Z",
    "comment": "",
    "displayed": true,
    "groups": [
      {
        "id": "GroupCompanyId"
      }
    ],
    "id": "b4F",
    "mustIdentifyStops": false,
    "name": "Main depot",
    "points": [
      {
        "x": -79.7123,
        "y": 43.4392
      },
      {
        "x": -79.7111,
        "y": 43.4383
      },
      {
        "x": -79.7123,
        "y": 43.4374
      },
      {
        "x": -79.7135,
        "y": 43.4383
      },
      {
        "x": -79.7123,
        "y": 43.4392
      }
    ],
    "zoneTypes": [
      "ZoneTypeCustomerId"
    ]
  },
  "zone_id": "b4F"
}
```

### Delete zone

Delete a zone for good.

**Inputs**

- Zone (`zone_id`, text, required): The zone. Pick one, or give its id from an earlier step.

**Outputs**

- `deleted` (true/false): Always true once deleted
- `zone_id` (text): The zone deleted

**Example output**

```json
{
  "deleted": true,
  "zone_id": "b4F"
}
```

### Get address at a location

Look up the street address at a latitude and longitude, such as a vehicle's position, and any zones it is in.

**Inputs**

- Latitude (`latitude`, number, required): Latitude in decimal degrees, -90 to 90, such as 43.4383. From -90 to 90.
- Longitude (`longitude`, number, required): Longitude in decimal degrees, -180 to 180, such as -79.7123. From -180 to 180.

**Outputs**

- `address` (object): The address, in parts
- `formatted_address` (text): The whole address on one line

**Example output**

```json
{
  "address": {
    "city": "Oakville",
    "country": "Canada",
    "formattedAddress": "2440 Winston Park Dr, Oakville, ON L6H 7V2, Canada",
    "postalCode": "L6H 7V2",
    "region": "ON",
    "streetName": "Winston Park Dr",
    "streetNumber": "2440",
    "zones": [
      {
        "id": "b4F",
        "name": "Main depot"
      }
    ]
  },
  "formatted_address": "2440 Winston Park Dr, Oakville, ON L6H 7V2, Canada"
}
```

### Get current user

Get the MyGeotab user the connection signs in as: name, email, time zone, groups and security clearance.

**Inputs**: None.

**Outputs**

- `user` (object): The user

**Example output**

```json
{
  "user": {
    "activeFrom": "2024-01-01T00:00:00.000Z",
    "activeTo": "2050-01-01T00:00:00.000Z",
    "comment": "",
    "companyGroups": [
      {
        "id": "GroupCompanyId"
      }
    ],
    "employeeNo": "",
    "firstName": "Jo",
    "id": "b1",
    "isDriver": false,
    "lastName": "Bloggs",
    "name": "fleet.manager@example.com",
    "phoneNumber": "",
    "securityGroups": [
      {
        "id": "GroupEverythingSecurityId"
      }
    ],
    "timeZoneId": "America/Toronto"
  }
}
```

### Get duty status logs

Get hours-of-service duty status logs (driving, on duty, off duty and so on) in a time window, for a driver, a vehicle or everyone.

**Inputs**

- Driver (`driver_id`, text): Only this driver. Leave empty for every driver.
- Vehicle (`vehicle_id`, text): Only this vehicle. Leave empty for every vehicle.
- Statuses (`statuses`, list): Only logs with these statuses. Leave empty for all. One or more of: `D` (Driving), `ON` (On duty), `OFF` (Off duty), `SB` (Sleeper berth), `PC` (Personal conveyance), `YM` (Yard move), `WT` (Wait time).
- From (`from_time`, date and time): Start of the time window. Defaults to seven days before its end.
- To (`to_time`, date and time): End of the time window. Defaults to now.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `duty_status_logs` (list): The logs

**Example output**

```json
{
  "count": 1,
  "duty_status_logs": [
    {
      "annotations": [],
      "dateTime": "2026-11-17T13:10:00.000Z",
      "device": {
        "id": "b3"
      },
      "driver": {
        "id": "b2A"
      },
      "id": "b8B2",
      "origin": "Automatic",
      "state": "Active",
      "status": "D"
    }
  ]
}
```

### Get engine readings

Get a vehicle's readings of one measure, such as odometer, engine hours or fuel level, in a time window.

**Inputs**

- Vehicle (`vehicle_id`, text, required): The vehicle. Pick one, or give its id from an earlier step.
- Reading (`diagnostic`, text, required): What to read. One of: `DiagnosticOdometerId` (Odometer (metres)), `DiagnosticEngineHoursId` (Engine hours (seconds)), `DiagnosticFuelLevelId` (Fuel level), `DiagnosticDeviceTotalFuelId` (Total fuel used), `DiagnosticDeviceTotalIdleFuelId` (Total fuel used idling), `DiagnosticEngineSpeedId` (Engine speed (RPM)), `DiagnosticEngineRoadSpeedId` (Road speed reported by the engine), `DiagnosticEngineCoolantTemperatureId` (Engine coolant temperature), `DiagnosticOutsideTemperatureId` (Outside temperature), `DiagnosticGoDeviceVoltageId` (Voltage at the GO device), `DiagnosticStateOfChargeId` (Electric vehicle battery charge), `DiagnosticIgnitionId` (Ignition on or off).
- From (`from_time`, date and time): Start of the time window. Defaults to seven days before its end.
- To (`to_time`, date and time): End of the time window. Defaults to now.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `readings` (list): The readings, each in 'data'

**Example output**

```json
{
  "count": 1,
  "readings": [
    {
      "data": 84213500,
      "dateTime": "2026-11-17T13:42:30.000Z",
      "device": {
        "id": "b3"
      },
      "diagnostic": {
        "id": "DiagnosticOdometerId"
      },
      "id": "b9C8"
    }
  ]
}
```

### Get fault codes

Get engine and device fault codes recorded in a time window, for a vehicle or the fleet, with their state and warning lamps.

**Inputs**

- Vehicle (`vehicle_id`, text): Only this vehicle. Leave empty for every vehicle.
- From (`from_time`, date and time): Start of the time window. Defaults to seven days before its end.
- To (`to_time`, date and time): End of the time window. Defaults to now.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `faults` (list): The fault records

**Example output**

```json
{
  "count": 1,
  "faults": [
    {
      "amberWarningLamp": false,
      "controller": {
        "id": "ControllerObdPowertrainId"
      },
      "count": 1,
      "dateTime": "2026-11-17T09:15:00.000Z",
      "device": {
        "id": "b3"
      },
      "diagnostic": {
        "id": "aXn2Wm0z4dE6Hqz5vT1ABCD"
      },
      "failureMode": {
        "id": "NoFailureModeId"
      },
      "faultState": "Active",
      "id": "b5D4",
      "malfunctionLamp": true,
      "protectWarningLamp": false,
      "redStopLamp": false
    }
  ]
}
```

### Get GPS history

Get a vehicle's recorded positions and speeds (km/h) in a time window, oldest first.

**Inputs**

- Vehicle (`vehicle_id`, text, required): The vehicle. Pick one, or give its id from an earlier step.
- From (`from_time`, date and time): Start of the time window. Defaults to one day before its end.
- To (`to_time`, date and time): End of the time window. Defaults to now.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `logs` (list): The GPS points

**Example output**

```json
{
  "count": 1,
  "logs": [
    {
      "dateTime": "2026-11-17T13:20:05.000Z",
      "device": {
        "id": "b3"
      },
      "id": "b1A2B3",
      "latitude": 43.4383,
      "longitude": -79.7123,
      "speed": 52
    }
  ]
}
```

### Get rule violations

Get the exception events (rule violations, such as speeding) raised in a time window, for a rule, a vehicle or the fleet.

**Inputs**

- Rule (`rule_id`, text): Only violations of this rule. Leave empty for every rule.
- Vehicle (`vehicle_id`, text): Only this vehicle. Leave empty for every vehicle.
- From (`from_time`, date and time): Start of the time window. Defaults to seven days before its end.
- To (`to_time`, date and time): End of the time window. Defaults to now.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `exception_events` (list): The violations

**Example output**

```json
{
  "count": 1,
  "exception_events": [
    {
      "activeFrom": "2026-11-17T13:25:00.000Z",
      "activeTo": "2026-11-17T13:26:10.000Z",
      "device": {
        "id": "b3"
      },
      "distance": 1.6,
      "driver": {
        "id": "b2A"
      },
      "duration": "00:01:10",
      "id": "b2E7",
      "rule": {
        "id": "RulePostedSpeedingId"
      }
    }
  ]
}
```

### Get trips

Get the trips driven in a time window, for a vehicle, a driver or the fleet: start, stop, distance (km), speeds (km/h), idling and where each ended.

**Inputs**

- Vehicle (`vehicle_id`, text): Only this vehicle. Leave empty for every vehicle.
- Driver (`driver_id`, text): Only this driver. Leave empty for every driver.
- From (`from_time`, date and time): Start of the time window. Defaults to seven days before its end.
- To (`to_time`, date and time): End of the time window. Defaults to now.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `trips` (list): The trips

**Example output**

```json
{
  "count": 1,
  "trips": [
    {
      "afterHoursEnd": false,
      "afterHoursStart": false,
      "averageSpeed": 34,
      "device": {
        "id": "b3"
      },
      "distance": 18.4,
      "driver": {
        "id": "b2A"
      },
      "drivingDuration": "00:32:30",
      "id": "b7F2",
      "idlingDuration": "00:03:10",
      "isSeatBeltOff": false,
      "maximumSpeed": 82,
      "nextTripStart": "2026-11-17T14:20:00.000Z",
      "start": "2026-11-17T13:10:00.000Z",
      "stop": "2026-11-17T13:42:30.000Z",
      "stopDuration": "00:37:30",
      "stopPoint": {
        "x": -79.7123,
        "y": 43.4383
      }
    }
  ]
}
```

### Get user

Get one MyGeotab user or driver with their email, employee number, groups and whether they are a driver.

**Inputs**

- User (`geotab_user_id`, text, required): The user or driver. Pick one, or give their id.

**Outputs**

- `user` (object): The user

**Example output**

```json
{
  "user": {
    "activeFrom": "2024-01-01T00:00:00.000Z",
    "activeTo": "2050-01-01T00:00:00.000Z",
    "comment": "",
    "companyGroups": [
      {
        "id": "GroupCompanyId"
      }
    ],
    "employeeNo": "",
    "firstName": "Sam",
    "id": "b2A",
    "isDriver": true,
    "lastName": "Driver",
    "name": "sam.driver@example.com",
    "phoneNumber": "",
    "securityGroups": [
      {
        "id": "GroupEverythingSecurityId"
      }
    ],
    "timeZoneId": "America/Toronto"
  }
}
```

### Get vehicle

Get one vehicle with its serial number, plate, VIN, comment and groups.

**Inputs**

- Vehicle (`vehicle_id`, text, required): The vehicle. Pick one, or give its id from an earlier step.

**Outputs**

- `vehicle` (object): The vehicle

**Example output**

```json
{
  "vehicle": {
    "activeFrom": "2024-01-01T00:00:00.000Z",
    "activeTo": "2050-01-01T00:00:00.000Z",
    "comment": "",
    "deviceType": "GO9",
    "groups": [
      {
        "id": "GroupCompanyId"
      }
    ],
    "id": "b3",
    "licensePlate": "ABCD 123",
    "licenseState": "ON",
    "name": "Van 12",
    "serialNumber": "G9A1B2C3D4E5",
    "timeZoneId": "America/Toronto",
    "vehicleIdentificationNumber": "1FTBW2CM5HKA12345"
  }
}
```

### Get vehicle locations

Get where vehicles are now: position, speed, heading, driver and whether each is driving, for one vehicle, a group or the fleet (Geotab returns up to 50 at a time).

**Inputs**

- Vehicle (`vehicle_id`, text): Only this vehicle. Leave empty for every vehicle.
- Group (`group_id`, text): Only vehicles in this group. Leave empty with no vehicle for the whole fleet.
- Most to return (`limit`, number): How many to return at most, 1 to 50. Defaults to 50. From 1 to 50.

**Outputs**

- `count` (number): How many were returned
- `locations` (list): Each vehicle's latest status

**Example output**

```json
{
  "count": 1,
  "locations": [
    {
      "bearing": 90,
      "currentStateDuration": "00:12:05",
      "dateTime": "2026-11-17T14:02:11.000Z",
      "device": {
        "id": "b3"
      },
      "driver": {
        "id": "b2A"
      },
      "groups": [
        {
          "id": "GroupCompanyId"
        }
      ],
      "id": "b3",
      "isDeviceCommunicating": true,
      "isDriving": true,
      "latitude": 43.4383,
      "longitude": -79.7123,
      "speed": 48
    }
  ]
}
```

### List groups

List the organization's groups (such as regions or departments), each with its parent and the groups under it.

**Inputs**: None.

**Outputs**

- `count` (number): How many were returned
- `groups` (list): The groups

**Example output**

```json
{
  "count": 1,
  "groups": [
    {
      "children": [
        {
          "id": "b27"
        }
      ],
      "comments": "",
      "id": "GroupCompanyId",
      "name": "",
      "parent": {
        "id": "GroupRootId"
      },
      "reference": ""
    }
  ]
}
```

### List messages

List text messages sent to or from vehicles in a time window, with when each was sent, delivered and read.

**Inputs**

- Vehicle (`vehicle_id`, text): Only this vehicle. Leave empty for every vehicle.
- Direction (`direction`, text): Messages to vehicles, from vehicles, or both. One of: `both` (Both ways (default)), `to_vehicles` (Sent to vehicles), `from_vehicles` (Sent from vehicles).
- From (`from_time`, date and time): Start of the time window. Defaults to seven days before its end.
- To (`to_time`, date and time): End of the time window. Defaults to now.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `text_messages` (list): The messages

**Example output**

```json
{
  "count": 1,
  "text_messages": [
    {
      "delivered": "2026-11-17T14:05:04.000Z",
      "device": {
        "id": "b3"
      },
      "id": "b6A1",
      "isDirectionToVehicle": true,
      "messageContent": {
        "contentType": "Normal",
        "message": "Please call the depot when you stop.",
        "urgent": false
      },
      "read": "2026-11-17T14:06:20.000Z",
      "sent": "2026-11-17T14:05:00.000Z",
      "user": {
        "id": "b1"
      }
    }
  ]
}
```

### List rules

List the rules that raise exception events, such as speeding, harsh braking or after-hours use.

**Inputs**

- Name contains (`name`, text): Only those whose name contains this text.
- Kind (`rule_type`, text): Only rules of this kind. Leave empty for every kind. One of: `Custom` (Rules your organization made), `Stock` (Geotab's built-in rules), `ZoneStop` (Stops in a zone).

**Outputs**

- `count` (number): How many were returned
- `rules` (list): The rules

**Example output**

```json
{
  "count": 1,
  "rules": [
    {
      "activeFrom": "2024-01-01T00:00:00.000Z",
      "activeTo": "2050-01-01T00:00:00.000Z",
      "baseType": "Stock",
      "comment": "",
      "groups": [
        {
          "id": "GroupCompanyId"
        }
      ],
      "id": "RulePostedSpeedingId",
      "name": "Speeding"
    }
  ]
}
```

### List users

List MyGeotab users, or only drivers, by name.

**Inputs**

- Name contains (`name`, text): Only people whose full name contains this text.
- Drivers only (`drivers_only`, true/false): Only users set up as drivers.
- Include archived (`include_archived`, true/false): Also list ones archived in MyGeotab. Off lists only active ones.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `users` (list): The users

**Example output**

```json
{
  "count": 2,
  "users": [
    {
      "activeFrom": "2024-01-01T00:00:00.000Z",
      "activeTo": "2050-01-01T00:00:00.000Z",
      "comment": "",
      "companyGroups": [
        {
          "id": "GroupCompanyId"
        }
      ],
      "employeeNo": "",
      "firstName": "Jo",
      "id": "b1",
      "isDriver": false,
      "lastName": "Bloggs",
      "name": "fleet.manager@example.com",
      "phoneNumber": "",
      "securityGroups": [
        {
          "id": "GroupEverythingSecurityId"
        }
      ],
      "timeZoneId": "America/Toronto"
    },
    {
      "activeFrom": "2024-01-01T00:00:00.000Z",
      "activeTo": "2050-01-01T00:00:00.000Z",
      "comment": "",
      "companyGroups": [
        {
          "id": "GroupCompanyId"
        }
      ],
      "employeeNo": "",
      "firstName": "Sam",
      "id": "b2A",
      "isDriver": true,
      "lastName": "Driver",
      "name": "sam.driver@example.com",
      "phoneNumber": "",
      "securityGroups": [
        {
          "id": "GroupEverythingSecurityId"
        }
      ],
      "timeZoneId": "America/Toronto"
    }
  ]
}
```

### List vehicles

List the vehicles (GO devices) in the database, by name or group: name, serial number, plate, VIN and groups.

**Inputs**

- Name contains (`name`, text): Only those whose name contains this text.
- Group (`group_id`, text): Only vehicles in this group or the groups under it.
- Include archived (`include_archived`, true/false): Also list ones archived in MyGeotab. Off lists only active ones.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `vehicles` (list): The vehicles

**Example output**

```json
{
  "count": 1,
  "vehicles": [
    {
      "activeFrom": "2024-01-01T00:00:00.000Z",
      "activeTo": "2050-01-01T00:00:00.000Z",
      "comment": "",
      "deviceType": "GO9",
      "groups": [
        {
          "id": "GroupCompanyId"
        }
      ],
      "id": "b3",
      "licensePlate": "ABCD 123",
      "licenseState": "ON",
      "name": "Van 12",
      "serialNumber": "G9A1B2C3D4E5",
      "timeZoneId": "America/Toronto",
      "vehicleIdentificationNumber": "1FTBW2CM5HKA12345"
    }
  ]
}
```

### List zones

List the zones (geofences) active now, such as customer sites and depots, with their outlines.

**Inputs**

- Name contains (`name`, text): Only those whose name contains this text.
- Most to return (`limit`, number): How many to return at most, 1 to 5,000. Defaults to 100. From 1 to 5000.

**Outputs**

- `count` (number): How many were returned
- `zones` (list): The zones

**Example output**

```json
{
  "count": 1,
  "zones": [
    {
      "activeFrom": "2026-11-17T14:00:00Z",
      "activeTo": "2050-01-01T00:00:00.000Z",
      "comment": "",
      "displayed": true,
      "groups": [
        {
          "id": "GroupCompanyId"
        }
      ],
      "id": "b4F",
      "mustIdentifyStops": false,
      "name": "Main depot",
      "points": [
        {
          "x": -79.7123,
          "y": 43.4392
        },
        {
          "x": -79.7111,
          "y": 43.4383
        },
        {
          "x": -79.7123,
          "y": 43.4374
        },
        {
          "x": -79.7135,
          "y": 43.4383
        },
        {
          "x": -79.7123,
          "y": 43.4392
        }
      ],
      "zoneTypes": [
        "ZoneTypeCustomerId"
      ]
    }
  ]
}
```

### Send message to vehicle

Send a text message to a vehicle's driver, shown in Geotab Drive or on the vehicle's connected display, from the connected user.

**Inputs**

- Vehicle (`vehicle_id`, text, required): The vehicle. Pick one, or give its id from an earlier step.
- Message (`message`, text, required): What to say, up to 1,000 characters.
- Urgent (`urgent`, true/false): Sound an alert in Geotab Drive even while the vehicle is moving.

**Outputs**

- `message_id` (text): The message's id
- `text_message` (object): The message as sent

**Example output**

```json
{
  "message_id": "b6A1",
  "text_message": {
    "device": {
      "id": "b3"
    },
    "id": "b6A1",
    "isDirectionToVehicle": true,
    "messageContent": {
      "contentType": "Normal",
      "message": "Please call the depot when you stop.",
      "urgent": false
    },
    "user": {
      "id": "b1"
    }
  }
}
```

### Update vehicle

Change a vehicle's name, licence plate, plate state or province, VIN or comment. Only the fields given change.

**Inputs**

- Vehicle (`vehicle_id`, text, required): The vehicle. Pick one, or give its id from an earlier step.
- Name (`name`, text): A new name, up to 50 characters. Leave empty to keep it.
- Licence plate (`license_plate`, text): A new licence plate. Leave empty to keep it.
- Plate state or province (`license_state`, text): Where the plate is registered, such as ON or TX.
- VIN (`vin`, text): The vehicle identification number. Leave empty to keep it.
- Comment (`comment`, text): A new comment. Leave empty to keep it.

**Outputs**

- `changed_fields` (list): The Geotab fields that were changed
- `vehicle` (object): The vehicle as saved

**Example output**

```json
{
  "changed_fields": [
    "name"
  ],
  "vehicle": {
    "activeFrom": "2024-01-01T00:00:00.000Z",
    "activeTo": "2050-01-01T00:00:00.000Z",
    "comment": "",
    "deviceType": "GO9",
    "groups": [
      {
        "id": "GroupCompanyId"
      }
    ],
    "id": "b3",
    "licensePlate": "ABCD 123",
    "licenseState": "ON",
    "name": "Van 12 (Oakville)",
    "serialNumber": "G9A1B2C3D4E5",
    "timeZoneId": "America/Toronto",
    "vehicleIdentificationNumber": "1FTBW2CM5HKA12345"
  }
}
```

### Update zone

Rename a zone or change its comment, keeping its outline and everything else.

**Inputs**

- Zone (`zone_id`, text, required): The zone. Pick one, or give its id from an earlier step.
- Name (`name`, text): A new name. Leave empty to keep it.
- Comment (`comment`, text): A new comment. Leave empty to keep it.

**Outputs**

- `changed_fields` (list): The Geotab fields that were changed
- `zone` (object): The zone as saved

**Example output**

```json
{
  "changed_fields": [
    "name"
  ],
  "zone": {
    "activeFrom": "2026-11-17T14:00:00Z",
    "activeTo": "2050-01-01T00:00:00.000Z",
    "comment": "",
    "displayed": true,
    "groups": [
      {
        "id": "GroupCompanyId"
      }
    ],
    "id": "b4F",
    "mustIdentifyStops": false,
    "name": "Main depot (north)",
    "points": [
      {
        "x": -79.7123,
        "y": 43.4392
      },
      {
        "x": -79.7111,
        "y": 43.4383
      },
      {
        "x": -79.7123,
        "y": 43.4374
      },
      {
        "x": -79.7135,
        "y": 43.4383
      },
      {
        "x": -79.7123,
        "y": 43.4392
      }
    ],
    "zoneTypes": [
      "ZoneTypeCustomerId"
    ]
  }
}
```
