Cisco Meraki

App · 25 actions

Manage Cisco Meraki cloud-managed networks: look up devices and their status, block or allow clients, change Wi-Fi names and passwords, read event and change logs, and invite or remove dashboard administrators. Start a workflow when a device goes offline, a health alert is raised, a setting changes or Meraki sends an alert.

Actions

ActionWhat it does
Blink device lightsFlash a device's lights for a while, so someone on site can find it.
Create networkCreate a network (a site) in an organization, for the kinds of device it will hold.
Delete networkDelete a network and all its settings.
Get clientGet one client of a network: its name, addresses, maker, operating system, where it connected and when it was first and last seen.
Get deviceGet one device: its name, model, network, IP address, firmware, tags, address and notes.
Get networkGet one network: its name, product types, time zone, tags and notes.
Invite administratorInvite someone to the Meraki dashboard as an administrator of the whole organization or of one network.
List administratorsList the organization's dashboard administrators, with their access, whether they use two-factor sign-in and when they were last active.
List clientsList the phones, laptops and other devices that used a network lately, with their address, the SSID or port they used and their data use.
List configuration changesRead the organization's change log, newest first: who changed which setting, when, and what it was before and after.
List device status changesList when devices went online, offline, alerting or dormant, up to 31 days back.
List device statusesSee whether each device is online, alerting, offline or dormant, with when it last checked in and its IP addresses.
List devicesList the access points, switches, security appliances and other devices in an organization's networks, with their model, address and firmware.
List health alertsList the organization's health alerts, newest first: devices unreachable, ports with errors, uplinks down, and what each affects.
List network eventsRead a network's event log, newest first: clients joining and leaving, ports going up and down, VPN and DHCP events.
List networksList an organization's networks (sites), with what each runs, its time zone and tags.
List organizationsList the Meraki organizations your API key can reach, with their IDs.
List SSIDsList a wireless network's 15 SSIDs (Wi-Fi network names), with whether each is on, hidden, and how people join it.
Provision clientSet the access policy for a device by its MAC address, before or after it joins a network: block it, always allow it, or give it a group policy.
Reboot deviceRestart a device.
Remove administratorTake away all of an administrator's access to the organization, for instance when they leave.
Update client policyBlock a client, always allow it, give it a group policy, or put it back to the network's normal rules.
Update deviceRename a device or change its tags, address or notes.
Update networkRename a network or change its time zone, tags or notes.
Update SSIDRename a Wi-Fi network (SSID), turn it on or off, hide it, or change its password, for instance the guest Wi-Fi's each week.

Flash a device's lights for a while, so someone on site can find it.

Inputs

DeviceserialtextRequired
The device, or its serial, like Q234-ABCD-5678.
Secondsdurationnumber
How long to blink, 5 to 120 seconds. Meraki's default is 20.From 5 to 120.

Outputs

durationnumber
How long it blinks, in seconds
dutynumber
How much of each blink the light is on, in percent
periodnumber
How fast, in milliseconds per blink
serialtext
The device
Example output
{
  "duration": 20,
  "duty": 50,
  "period": 160,
  "serial": "Q234-ABCD-5678"
}

Create network

Create a network (a site) in an organization, for the kinds of device it will hold. Devices are added to it in the dashboard.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
NamenametextRequired
The network's name.
Product typesproduct_typeslistRequired
What it will run. Choose more than one for a combined network.One or more of: appliance (Security & SD-WAN (MX)), switch (Switches (MS)), wireless (Wireless (MR)), camera (Cameras (MV)), sensor (Sensors (MT)), cellularGateway (Cellular gateways (MG)), systemsManager (Systems Manager (SM)), wirelessController (Wireless controllers), campusGateway (Campus gateways), secureConnect (Secure Connect).
Time zonetime_zonetext
A time zone name, like America/Los_Angeles or Europe/London.
Tagstagstext
Tags, separated by spaces or commas. They replace the tags it has now.
Notesnotestext
Notes about the network.

Outputs

networkobject
The network
Example output
{
  "network": {
    "enrollment_string": "my-enrollment-string",
    "id": "N_24329156",
    "is_bound_to_config_template": false,
    "name": "Main Office",
    "notes": "Additional description of the network",
    "organization_id": "2930418",
    "product_types": [
      "appliance",
      "switch",
      "wireless"
    ],
    "tags": [
      "tag1",
      "tag2"
    ],
    "time_zone": "America/Los_Angeles",
    "url": "https://n1.meraki.com//n//manage/nodes/list"
  }
}

Delete network

Delete a network and all its settings. Its devices go back to the organization's inventory. This can't be undone.

Inputs

Networknetwork_idtextRequired
The Meraki network.

Outputs

deletedtrue/false
Always true once deleted
network_idtext
The network deleted
Example output
{
  "deleted": true,
  "network_id": "N_24329156"
}

Get client

Get one client of a network: its name, addresses, maker, operating system, where it connected and when it was first and last seen.

Inputs

Networknetwork_idtextRequired
The Meraki network.
Client IDclient_idtextRequired
The client's ID in Meraki (like k74272e, from 'List clients' or 'Provision client') or its MAC address.

Outputs

clientobject
The client
Example output
{
  "client": {
    "description": "Miles's phone",
    "device_type_prediction": "iPhone SE, iOS9.3.5",
    "first_seen": "2025-11-11T00:00:00Z",
    "id": "k74272e",
    "ip": "1.2.3.4",
    "ip6": "2001:db8:3c4d:15::1",
    "last_seen": "2025-11-12T00:00:00Z",
    "mac": "22:33:44:55:66:77",
    "manufacturer": "Apple",
    "named_vlan": "My VLAN",
    "notes": "",
    "os": "iOS",
    "recent_device_connection": "Wireless",
    "recent_device_mac": "00:11:22:33:44:55",
    "recent_device_name": "My AP",
    "recent_device_serial": "Q234-ABCD-5678",
    "ssid": "My SSID",
    "status": "Online",
    "switchport": "",
    "usage_received": 61,
    "usage_sent": 138,
    "user": "milesmeraki",
    "vlan": "100"
  }
}

Get device

Get one device: its name, model, network, IP address, firmware, tags, address and notes.

Inputs

DeviceserialtextRequired
The device, or its serial, like Q234-ABCD-5678.

Outputs

deviceobject
The device
Example output
{
  "device": {
    "address": "1600 Pennsylvania Ave",
    "configuration_updated_at": "2026-09-15T01:19:07Z",
    "firmware": "wireless-25-14",
    "lan_ip": "1.2.3.4",
    "lat": 37.4180951010362,
    "lng": -122.098531723022,
    "mac": "00:11:22:33:44:55",
    "model": "MR34",
    "name": "My AP",
    "network_id": "N_24329156",
    "notes": "My AP's note",
    "product_type": "wireless",
    "serial": "Q234-ABCD-5678",
    "tags": [
      "recently-added"
    ],
    "url": "https://n1.meraki.com/MyOrg/n/XXXXXX/manage/nodes/new_list/1"
  }
}

Get network

Get one network: its name, product types, time zone, tags and notes.

Inputs

Networknetwork_idtextRequired
The Meraki network.

Outputs

networkobject
The network
Example output
{
  "network": {
    "enrollment_string": "my-enrollment-string",
    "id": "N_24329156",
    "is_bound_to_config_template": false,
    "name": "Main Office",
    "notes": "Additional description of the network",
    "organization_id": "2930418",
    "product_types": [
      "appliance",
      "switch",
      "wireless"
    ],
    "tags": [
      "tag1",
      "tag2"
    ],
    "time_zone": "America/Los_Angeles",
    "url": "https://n1.meraki.com//n//manage/nodes/list"
  }
}

Invite administrator

Invite someone to the Meraki dashboard as an administrator of the whole organization or of one network. Meraki emails them an invitation.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
EmailemailtextRequired
Their email address.
NamenametextRequired
Their name.
Organization accessorg_accesstextRequired
What they can do across the organization. Choose None to give access to one network only.One of: none (None: only the networks given), read-only, full, enterprise (Enterprise (devices and networks, not the organization)).
Networknetwork_idtext
A network to give them access to. Needed when organization access is None.
Network accessnetwork_accesstext
What they can do on that network. Read-only when left blank.One of: read-only, full, monitor-only, guest-ambassador (Guest ambassador).

Outputs

adminobject
The administrator
Example output
{
  "admin": {
    "account_status": "ok",
    "authentication_method": "Email",
    "email": "miles@meraki.com",
    "has_api_key": true,
    "id": "212406",
    "last_active": "2026-11-11T00:00:00Z",
    "name": "Miles Meraki",
    "networks": [
      {
        "access": "full",
        "id": "N_24329156"
      }
    ],
    "org_access": "none",
    "tags": [
      {
        "access": "read-only",
        "tag": "west"
      }
    ],
    "two_factor_enabled": false
  }
}

List administrators

List the organization's dashboard administrators, with their access, whether they use two-factor sign-in and when they were last active.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.

Outputs

adminslist
The administrators
countnumber
How many there are
Example output
{
  "admins": [
    {
      "account_status": "ok",
      "authentication_method": "Email",
      "email": "miles@meraki.com",
      "has_api_key": true,
      "id": "212406",
      "last_active": "2026-11-11T00:00:00Z",
      "name": "Miles Meraki",
      "networks": [
        {
          "access": "full",
          "id": "N_24329156"
        }
      ],
      "org_access": "none",
      "tags": [
        {
          "access": "read-only",
          "tag": "west"
        }
      ],
      "two_factor_enabled": false
    }
  ],
  "count": 1
}

List clients

List the phones, laptops and other devices that used a network lately, with their address, the SSID or port they used and their data use.

Inputs

Networknetwork_idtextRequired
The Meraki network.
Seen intimespantext
How far back to look. Meraki's default is the last day.One of: 3600 (Last hour), 86400 (Last day (default)), 604800 (Last 7 days), 2678400 (Last 31 days). Default: 86400.
Statusstatustext
Only clients online or offline now.One of: Online, Offline.
Connectionconnectiontext
Only wireless or only wired clients.One of: Wireless, Wired.
MAC addressmactext
Only clients whose MAC address contains this.
IP addressiptext
Only clients whose IP address contains this.
Namedescriptiontext
Only clients whose name contains this.
Per pageper_pagenumber
How many to get, 3 to 5000.From 3 to 5000.
Page tokenpage_tokentext
For the next page: the 'Next page token' an earlier run of this step gave. Leave blank for the first page.

Outputs

clientslist
The clients
countnumber
How many are on this page
next_page_tokentext
Give this as 'Page token' for the next page; empty on the last
Example output
{
  "clients": [
    {
      "description": "Miles's phone",
      "device_type_prediction": "iPhone SE, iOS9.3.5",
      "first_seen": "2025-11-11T00:00:00Z",
      "id": "k74272e",
      "ip": "1.2.3.4",
      "ip6": "2001:db8:3c4d:15::1",
      "last_seen": "2025-11-12T00:00:00Z",
      "mac": "22:33:44:55:66:77",
      "manufacturer": "Apple",
      "named_vlan": "My VLAN",
      "notes": "",
      "os": "iOS",
      "recent_device_connection": "Wireless",
      "recent_device_mac": "00:11:22:33:44:55",
      "recent_device_name": "My AP",
      "recent_device_serial": "Q234-ABCD-5678",
      "ssid": "My SSID",
      "status": "Online",
      "switchport": "",
      "usage_received": 61,
      "usage_sent": 138,
      "user": "milesmeraki",
      "vlan": "100"
    }
  ],
  "count": 1,
  "next_page_token": ""
}

List configuration changes

Read the organization's change log, newest first: who changed which setting, when, and what it was before and after. Up to a year back.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
Networknetwork_idtext
Only this network. Leave blank for all.
Administratoradmin_idtext
Only this administrator's changes.
Fromstart_timedate and time
Only changes at or after this time.
Toend_timedate and time
Only changes before this time.
Per pageper_pagenumber
How many to get, 3 to 5000.From 3 to 5000.
Page tokenpage_tokentext
For the next page: the 'Next page token' an earlier run of this step gave. Leave blank for the first page.

Outputs

changeslist
The changes, newest first
countnumber
How many are on this page
next_page_tokentext
Give this as 'Page token' for the next page; empty on the last
Example output
{
  "changes": [
    {
      "admin_email": "miles@meraki.com",
      "admin_id": "212406",
      "admin_name": "Miles Meraki",
      "id": "acca5cefc69dbba203cc09450d066932",
      "label": "PUT /api/v1/networks/N_24329156",
      "network_id": "N_24329156",
      "network_name": "Main Office",
      "network_url": "https://n1.meraki.com//n//manage/nodes/list",
      "new_value": "{\"name\":\"Main Office (HQ)\"}",
      "old_value": "{\"name\":\"Main Office\"}",
      "page": "via API",
      "ssid_name": "My SSID",
      "ssid_number": 1,
      "ts": "2026-11-11T00:00:00.090210Z"
    }
  ],
  "count": 1,
  "next_page_token": ""
}

List device status changes

List when devices went online, offline, alerting or dormant, up to 31 days back. Without times, the last day.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
Networknetwork_idtext
Only this network. Leave blank for all.
New statusesstatuseslist
Only changes to these statuses. Leave empty for all.One or more of: online, alerting, offline, dormant.
Product typesproduct_typeslist
Only these kinds of device. Leave empty for all.One or more of: appliance (Security & SD-WAN (MX)), switch (Switches (MS)), wireless (Wireless (MR)), camera (Cameras (MV)), sensor (Sensors (MT)), cellularGateway (Cellular gateways (MG)), systemsManager (Systems Manager (SM)), wirelessController (Wireless controllers), campusGateway (Campus gateways), secureConnect (Secure Connect).
Fromstart_timedate and time
Only changes at or after this time.
Toend_timedate and time
Only changes before this time.
Per pageper_pagenumber
How many to get, 3 to 1000.From 3 to 1000.
Page tokenpage_tokentext
For the next page: the 'Next page token' an earlier run of this step gave. Leave blank for the first page.

Outputs

changeslist
The status changes
countnumber
How many are on this page
next_page_tokentext
Give this as 'Page token' for the next page; empty on the last
Example output
{
  "changes": [
    {
      "device_name": "My AP",
      "id": "bf1a58d236db09138e8ed497fe637519",
      "model": "MR34",
      "network_id": "N_24329156",
      "network_name": "Main Office",
      "network_url": "https://n1.meraki.com//n//manage/nodes/list",
      "new_status": "offline",
      "old_status": "online",
      "product_type": "wireless",
      "serial": "Q234-ABCD-5678",
      "ts": "2026-11-11T00:00:00.090210Z"
    }
  ],
  "count": 1,
  "next_page_token": ""
}

List device statuses

See whether each device is online, alerting, offline or dormant, with when it last checked in and its IP addresses.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
Networknetwork_idtext
Only this network. Leave blank for all.
Statusesstatuseslist
Only devices with these statuses. Leave empty for all.One or more of: online, alerting, offline, dormant.
Product typesproduct_typeslist
Only these kinds of device. Leave empty for all.One or more of: appliance (Security & SD-WAN (MX)), switch (Switches (MS)), wireless (Wireless (MR)), camera (Cameras (MV)), sensor (Sensors (MT)), cellularGateway (Cellular gateways (MG)), systemsManager (Systems Manager (SM)), wirelessController (Wireless controllers), campusGateway (Campus gateways), secureConnect (Secure Connect).
Per pageper_pagenumber
How many to get, 3 to 1000.From 3 to 1000.
Page tokenpage_tokentext
For the next page: the 'Next page token' an earlier run of this step gave. Leave blank for the first page.

Outputs

countnumber
How many are on this page
deviceslist
The devices and their status
next_page_tokentext
Give this as 'Page token' for the next page; empty on the last
Example output
{
  "count": 1,
  "devices": [
    {
      "gateway": "1.2.3.5",
      "ip_type": "dhcp",
      "lan_ip": "1.2.3.4",
      "last_reported_at": "2026-11-11T00:00:00.090210Z",
      "mac": "00:11:22:33:44:55",
      "model": "MR34",
      "name": "My AP",
      "network_id": "N_24329156",
      "primary_dns": "8.8.8.8",
      "product_type": "wireless",
      "public_ip": "123.123.123.1",
      "secondary_dns": "8.8.4.4",
      "serial": "Q234-ABCD-5678",
      "status": "online",
      "tags": [
        "tag1",
        "tag2"
      ]
    }
  ],
  "next_page_token": ""
}

List devices

List the access points, switches, security appliances and other devices in an organization's networks, with their model, address and firmware.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
Networknetwork_idtext
Only this network. Leave blank for all.
Product typesproduct_typeslist
Only these kinds of device. Leave empty for all.One or more of: appliance (Security & SD-WAN (MX)), switch (Switches (MS)), wireless (Wireless (MR)), camera (Cameras (MV)), sensor (Sensors (MT)), cellularGateway (Cellular gateways (MG)), systemsManager (Systems Manager (SM)), wirelessController (Wireless controllers), campusGateway (Campus gateways), secureConnect (Secure Connect).
Namenametext
Only devices whose name contains this.
Modelmodeltext
Only devices whose model contains this, like MR.
Tagtagtext
Only devices with this tag.
Per pageper_pagenumber
How many to get, 3 to 1000.From 3 to 1000.
Page tokenpage_tokentext
For the next page: the 'Next page token' an earlier run of this step gave. Leave blank for the first page.

Outputs

countnumber
How many are on this page
deviceslist
The devices
next_page_tokentext
Give this as 'Page token' for the next page; empty on the last
Example output
{
  "count": 1,
  "devices": [
    {
      "address": "1600 Pennsylvania Ave",
      "configuration_updated_at": "2026-09-15T01:19:07Z",
      "firmware": "wireless-25-14",
      "lan_ip": "1.2.3.4",
      "lat": 37.4180951010362,
      "lng": -122.098531723022,
      "mac": "00:11:22:33:44:55",
      "model": "MR34",
      "name": "My AP",
      "network_id": "N_24329156",
      "notes": "My AP's note",
      "product_type": "wireless",
      "serial": "Q234-ABCD-5678",
      "tags": [
        "recently-added"
      ],
      "url": "https://n1.meraki.com/MyOrg/n/XXXXXX/manage/nodes/new_list/1"
    }
  ],
  "next_page_token": ""
}

List health alerts

List the organization's health alerts, newest first: devices unreachable, ports with errors, uplinks down, and what each affects.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
Networknetwork_idtext
Only this network. Leave blank for all.
Categorycategorytext
Only alerts of this kind.One of: connectivity, device_health (Device health), configuration, experience_metrics (Experience metrics), insights.
Statusstatustext
Active alerts, or those resolved or dismissed.One of: active (Active (default)), resolved, dismissed. Default: active.
Per pageper_pagenumber
How many to get, 4 to 300.From 4 to 300.
Page tokenpage_tokentext
For the next page: the 'Next page token' an earlier run of this step gave. Leave blank for the first page.

Outputs

alertslist
The alerts
countnumber
How many are on this page
next_page_tokentext
Give this as 'Page token' for the next page; empty on the last
Example output
{
  "alerts": [
    {
      "category": "connectivity",
      "description": "Very high proportion of CRC errors on port 33",
      "device_type": "MS",
      "devices": [
        {
          "mac": "aa:bb:cc:dd:ee:ff",
          "name": "Device 1",
          "product_type": "switch",
          "serial": "Q2QP-5VYM-YM8H",
          "url": "https://n1.meraki.com/n/manage/nodes/new_list/7911238"
        }
      ],
      "dismissed_at": "",
      "id": "1234",
      "network_id": "N_24329156",
      "network_name": "Main Office",
      "network_url": "https://n1.meraki.com//n//manage/nodes/list",
      "resolved_at": "",
      "severity": "warning",
      "started_at": "2026-11-01T15:48:57Z",
      "title": "CRC errors detected",
      "type": "crc_errors_error"
    }
  ],
  "count": 1,
  "next_page_token": ""
}

List network events

Read a network's event log, newest first: clients joining and leaving, ports going up and down, VPN and DHCP events.

Inputs

Networknetwork_idtextRequired
The Meraki network.
Product typeproduct_typetext
Which devices' log to read. Needed for a network with more than one kind of device.One of: appliance (Security & SD-WAN (MX)), switch (Switches (MS)), wireless (Wireless (MR)), camera (Cameras (MV)), cellularGateway (Cellular gateways (MG)), systemsManager (Systems Manager (SM)), wirelessController (Wireless controllers), campusGateway (Campus gateways), secureConnect (Secure Connect).
Event typesevent_typeslist
Only these kinds of event. Leave empty for all.
Per pageper_pagenumber
How many to get, 3 to 1000. Meraki's default is 10.From 3 to 1000.
Page tokenpage_tokentext
For older events: the 'Next page token' an earlier run of this step gave. Leave blank for the newest.

Outputs

countnumber
How many are on this page
eventslist
The events, newest first
next_page_tokentext
Give this as 'Page token' for older events
page_end_attext
When the latest event on this page was
page_start_attext
When the earliest event on this page was
Example output
{
  "count": 1,
  "events": [
    {
      "category": "80211",
      "client_description": "Miles's phone",
      "client_id": "k74272e",
      "client_mac": "22:33:44:55:66:77",
      "description": "802.11 association",
      "device_name": "My AP",
      "device_serial": "Q234-ABCD-5678",
      "event_data": {
        "channel": "36",
        "radio": "1",
        "rssi": "12"
      },
      "id": "0a51ce51fc827c2cc33fa24b5faf0980",
      "network_id": "N_24329156",
      "occurred_at": "2026-11-11T00:00:00.090210Z",
      "ssid_number": 1,
      "type": "association"
    }
  ],
  "next_page_token": "",
  "page_end_at": "2026-11-11T00:00:00.090210Z",
  "page_start_at": "2026-11-11T00:00:00.090210Z"
}

List networks

List an organization's networks (sites), with what each runs, its time zone and tags.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
Product typesproduct_typeslist
Only these kinds of device. Leave empty for all.One or more of: appliance (Security & SD-WAN (MX)), switch (Switches (MS)), wireless (Wireless (MR)), camera (Cameras (MV)), sensor (Sensors (MT)), cellularGateway (Cellular gateways (MG)), systemsManager (Systems Manager (SM)), wirelessController (Wireless controllers), campusGateway (Campus gateways), secureConnect (Secure Connect).
Tagtagtext
Only networks with this tag.
Per pageper_pagenumber
How many to get, 3 to 1000.From 3 to 1000.
Page tokenpage_tokentext
For the next page: the 'Next page token' an earlier run of this step gave. Leave blank for the first page.

Outputs

countnumber
How many are on this page
networkslist
The networks
next_page_tokentext
Give this as 'Page token' for the next page; empty on the last
Example output
{
  "count": 1,
  "networks": [
    {
      "enrollment_string": "my-enrollment-string",
      "id": "N_24329156",
      "is_bound_to_config_template": false,
      "name": "Main Office",
      "notes": "Additional description of the network",
      "organization_id": "2930418",
      "product_types": [
        "appliance",
        "switch",
        "wireless"
      ],
      "tags": [
        "tag1",
        "tag2"
      ],
      "time_zone": "America/Los_Angeles",
      "url": "https://n1.meraki.com//n//manage/nodes/list"
    }
  ],
  "next_page_token": ""
}

List organizations

List the Meraki organizations your API key can reach, with their IDs.

Inputs

None.

Outputs

countnumber
How many there are
organizationslist
The organizations
Example output
{
  "count": 1,
  "organizations": [
    {
      "api_enabled": true,
      "id": "2930418",
      "licensing_model": "co-term",
      "name": "My organization",
      "region": "North America",
      "url": "https://dashboard.meraki.com/o/VjjsAd/manage/organization/overview"
    }
  ]
}

List SSIDs

List a wireless network's 15 SSIDs (Wi-Fi network names), with whether each is on, hidden, and how people join it.

Inputs

Networknetwork_idtextRequired
The Meraki network.

Outputs

countnumber
How many there are
ssidslist
The SSIDs
Example output
{
  "count": 1,
  "ssids": [
    {
      "auth_mode": "psk",
      "availability_tags": [],
      "available_on_all_aps": true,
      "band_selection": "Dual band operation",
      "enabled": true,
      "encryption_mode": "wpa",
      "ip_assignment_mode": "NAT mode",
      "name": "Guest Wi-Fi",
      "number": 0,
      "splash_page": "None",
      "visible": true,
      "wpa_encryption_mode": "WPA2 only"
    }
  ]
}

Provision client

Set the access policy for a device by its MAC address, before or after it joins a network: block it, always allow it, or give it a group policy. Gives back the client ID Meraki uses for it.

Inputs

Networknetwork_idtextRequired
The Meraki network.
MAC addressmactextRequired
The device's MAC address, like 00:11:22:33:44:55.
Namenametext
A name to show for it in Meraki.
Policydevice_policytextRequired
What the network does with it.One of: Normal (Normal (the network's own rules)), Blocked, Allowed (Allowed (skips splash pages and firewall rules)), Group policy.
Group policygroup_policy_idtext
The group policy, when the policy is Group policy.

Outputs

client_idtext
The client's ID in Meraki
device_policytext
The policy it now has
group_policy_idtext
The group policy's ID, for Group policy
mactext
Its MAC address
messagetext
What a blocked client is shown, if anything
nametext
Its name
Example output
{
  "client_id": "k74272e",
  "device_policy": "Blocked",
  "group_policy_id": "",
  "mac": "00:11:22:33:44:55",
  "message": "",
  "name": "Miles's phone"
}

Reboot device

Restart a device. Everyone connected through it loses the connection for a minute or two.

Inputs

DeviceserialtextRequired
The device, or its serial, like Q234-ABCD-5678.

Outputs

rebootedtrue/false
Whether Meraki started the restart
serialtext
The device
Example output
{
  "rebooted": true,
  "serial": "Q234-ABCD-5678"
}

Remove administrator

Take away all of an administrator's access to the organization, for instance when they leave.

Inputs

Organizationorganization_idtext
The Meraki organization. Leave blank if your API key reaches only one.
Administratoradmin_idtextRequired
The administrator, or their ID from 'List administrators'.

Outputs

admin_idtext
The administrator removed
deletedtrue/false
Always true once removed
Example output
{
  "admin_id": "212406",
  "deleted": true
}

Update client policy

Block a client, always allow it, give it a group policy, or put it back to the network's normal rules.

Inputs

Networknetwork_idtextRequired
The Meraki network.
Client IDclient_idtextRequired
The client's ID in Meraki (like k74272e, from 'List clients' or 'Provision client') or its MAC address.
Policydevice_policytextRequired
What the network does with it.One of: Normal (Normal (the network's own rules)), Blocked, Whitelisted (Allowed (skips splash pages and firewall rules)), Group policy.
Group policygroup_policy_idtext
The group policy, when the policy is Group policy.

Outputs

client_idtext
The client
policyobject
The client's policy
Example output
{
  "client_id": "k74272e",
  "policy": {
    "device_policy": "Blocked",
    "group_policy_id": "",
    "mac": "00:11:22:33:44:55",
    "policies_by_ssid": []
  }
}

Update device

Rename a device or change its tags, address or notes. Fields left blank stay as they are.

Inputs

DeviceserialtextRequired
The device, or its serial, like Q234-ABCD-5678.
Namenametext
Its new name.
Tagstagstext
Tags, separated by spaces or commas. They replace the tags it has now.
Addressaddresstext
Where it is, as a street address.
Move map markermove_map_markertrue/false
Also move its pin on the map to the new address.
Notesnotestext
Its notes, up to 255 characters.

Outputs

deviceobject
The device
Example output
{
  "device": {
    "address": "1600 Pennsylvania Ave",
    "configuration_updated_at": "2026-09-15T01:19:07Z",
    "firmware": "wireless-25-14",
    "lan_ip": "1.2.3.4",
    "lat": 37.4180951010362,
    "lng": -122.098531723022,
    "mac": "00:11:22:33:44:55",
    "model": "MR34",
    "name": "My AP",
    "network_id": "N_24329156",
    "notes": "My AP's note",
    "product_type": "wireless",
    "serial": "Q234-ABCD-5678",
    "tags": [
      "recently-added"
    ],
    "url": "https://n1.meraki.com/MyOrg/n/XXXXXX/manage/nodes/new_list/1"
  }
}

Update network

Rename a network or change its time zone, tags or notes. Fields left blank stay as they are.

Inputs

Networknetwork_idtextRequired
The Meraki network.
Namenametext
Its new name.
Time zonetime_zonetext
A time zone name, like America/Los_Angeles or Europe/London.
Tagstagstext
Tags, separated by spaces or commas. They replace the tags it has now.
Notesnotestext
Its new notes.

Outputs

networkobject
The network
Example output
{
  "network": {
    "enrollment_string": "my-enrollment-string",
    "id": "N_24329156",
    "is_bound_to_config_template": false,
    "name": "Main Office",
    "notes": "Additional description of the network",
    "organization_id": "2930418",
    "product_types": [
      "appliance",
      "switch",
      "wireless"
    ],
    "tags": [
      "tag1",
      "tag2"
    ],
    "time_zone": "America/Los_Angeles",
    "url": "https://n1.meraki.com//n//manage/nodes/list"
  }
}

Update SSID

Rename a Wi-Fi network (SSID), turn it on or off, hide it, or change its password, for instance the guest Wi-Fi's each week. Fields left blank stay as they are.

Inputs

Networknetwork_idtextRequired
The Meraki network.
SSIDnumbertextRequired
The SSID, or its number from 0 to 14.
Namenametext
Its new name, which phones and laptops see.
Enabledenabledtrue/false
Turn it on (or off).
Visiblevisibletrue/false
Advertise it (or hide it).
Passwordpsktext
Its new Wi-Fi password, 8 to 63 characters. Only for an SSID that uses a password.

Outputs

ssidobject
The SSID
Example output
{
  "ssid": {
    "auth_mode": "psk",
    "availability_tags": [],
    "available_on_all_aps": true,
    "band_selection": "Dual band operation",
    "enabled": true,
    "encryption_mode": "wpa",
    "ip_assignment_mode": "NAT mode",
    "name": "Guest Wi-Fi",
    "number": 0,
    "splash_page": "None",
    "visible": true,
    "wpa_encryption_mode": "WPA2 only"
  }
}

On this page