Dagster

App · 22 actions

Run and monitor your Dagster+ pipelines: launch jobs, materialize assets, follow runs and their logs, and switch schedules and sensors on and off.

Actions

ActionWhat it does
Delete runDelete a finished run and its logs from Dagster.
Get assetGet an asset with its group, jobs and the run that last built it.
Get deployment infoCheck the connection and get the Dagster version and the organization and deployment it reaches.
Get jobGet a job with its description, tags, schedules and sensors.
Get runGet a run's status, times, tags, config and step counts.
Get run logsGet a page of a run's event log, oldest first: what ran, what it logged and any error.
Get scheduleGet a schedule with its status and its next three run times.
Get sensorGet a sensor with its type, jobs and status.
Launch runStart a run of a job, with optional run config and tags.
List assetsList assets with their group and when each was last built.
List code locationsList the code locations deployed to the deployment, with whether each loaded and any error it hit.
List jobsList every job in every code location.
List runsList runs, newest first, filtered by job, status, creation time or tags.
List schedulesList every schedule with its cron, time zone and whether it is on.
List sensorsList every sensor with the jobs it runs and whether it is on.
Materialize assetsStart a run that builds the chosen assets.
Run againStart a new run that repeats an earlier one with the same config and tags, either all of it or only from the steps that failed.
Stop runAsk Dagster to stop a run that is queued or running.
Turn schedule offTurn a schedule off.
Turn schedule onTurn a schedule on.
Turn sensor offTurn a sensor off.
Turn sensor onTurn a sensor on.

Delete run

Delete a finished run and its logs from Dagster. This cannot be undone.

Inputs

Run IDrun_idtextRequired
The run's id, from 'Launch run', 'List runs' or an earlier step.

Outputs

deletedtrue/false
True once deleted
run_idtext
The run deleted
Example output
{
  "deleted": true,
  "run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a"
}

Get asset

Get an asset with its group, jobs and the run that last built it.

Inputs

AssetassettextRequired
The asset's key. Pick one, or type it; use / between the parts of a key with a prefix, such as analytics/orders.

Outputs

assetobject
The asset
Example output
{
  "asset": {
    "description": "All orders",
    "group": "analytics",
    "is_materializable": true,
    "is_partitioned": false,
    "job_names": [
      "daily_etl"
    ],
    "key": "analytics/orders",
    "last_materialization_run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
    "last_materialized_at": "2026-10-20T05:03:09Z",
    "path": [
      "analytics",
      "orders"
    ]
  }
}

Get deployment info

Check the connection and get the Dagster version and the organization and deployment it reaches.

Inputs

None.

Outputs

deploymenttext
The deployment
organizationtext
Your organization
urltext
The deployment's address
versiontext
The Dagster version
Example output
{
  "deployment": "prod",
  "organization": "acme",
  "url": "https://acme.dagster.cloud/prod",
  "version": "1.13.2"
}

Get job

Get a job with its description, tags, schedules and sensors.

Inputs

JobjobtextRequired
The job. Pick one, or give its name or a value from an earlier step.

Outputs

jobobject
The job
Example output
{
  "job": {
    "code_location": "analytics",
    "description": "Loads the day's orders",
    "key": "analytics/__repository__/daily_etl",
    "name": "daily_etl",
    "repository": "__repository__",
    "schedules": [
      "daily"
    ],
    "sensors": [
      "new_files"
    ],
    "tags": []
  }
}

Get run

Get a run's status, times, tags, config and step counts. 'is_finished' is true once it succeeded, failed or was canceled.

Inputs

Run IDrun_idtextRequired
The run's id, from 'Launch run', 'List runs' or an earlier step.

Outputs

runobject
The run
Example output
{
  "run": {
    "created_at": "2026-10-20T05:00:00Z",
    "ended_at": "2026-10-20T05:03:10Z",
    "is_finished": true,
    "job_name": "daily_etl",
    "materializations": 1,
    "parent_run_id": "",
    "root_run_id": "",
    "run_config_yaml": "{}\n",
    "run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
    "started_at": "2026-10-20T05:00:04Z",
    "status": "SUCCESS",
    "steps_failed": 0,
    "steps_succeeded": 3,
    "tags": [
      {
        "key": "dagster/schedule_name",
        "value": "daily"
      }
    ],
    "updated_at": "2026-10-20T05:03:10Z",
    "url": "https://acme.dagster.cloud/prod/runs/3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a"
  }
}

Get run logs

Get a page of a run's event log, oldest first: what ran, what it logged and any error.

Inputs

Run IDrun_idtextRequired
The run's id, from 'Launch run', 'List runs' or an earlier step.
Page sizelimitnumber
How many to return, 1 to 100.From 1 to 100.
Next page cursorcursortext
The 'next_cursor' from an earlier page, to get the page after it.

Outputs

countnumber
How many on this page
eventslist
The log events
next_cursortext
Pass as 'cursor' for the next page; empty on the last one
Example output
{
  "count": 1,
  "events": [
    {
      "event_type": "RunStartEvent",
      "level": "DEBUG",
      "message": "Started execution of run for \"daily_etl\".",
      "step_key": "",
      "timestamp": "2026-10-20T05:00:04Z"
    }
  ],
  "next_cursor": ""
}

Get schedule

Get a schedule with its status and its next three run times.

Inputs

SchedulescheduletextRequired
The schedule. Pick one, or give its name.

Outputs

scheduleobject
The schedule
Example output
{
  "schedule": {
    "code_location": "analytics",
    "cron_schedule": "0 5 * * *",
    "description": "",
    "job_name": "daily_etl",
    "key": "analytics/__repository__/daily",
    "name": "daily",
    "next_ticks": [
      "2026-10-27T05:00:00Z",
      "2026-10-28T05:00:00Z"
    ],
    "repository": "__repository__",
    "state_id": "9a1f::c3d2",
    "status": "RUNNING",
    "timezone": "UTC"
  }
}

Get sensor

Get a sensor with its type, jobs and status.

Inputs

SensorsensortextRequired
The sensor. Pick one, or give its name.

Outputs

sensorobject
The sensor
Example output
{
  "sensor": {
    "code_location": "analytics",
    "description": "",
    "job_names": [
      "daily_etl"
    ],
    "key": "analytics/__repository__/new_files",
    "name": "new_files",
    "repository": "__repository__",
    "sensor_type": "STANDARD",
    "state_id": "7b2e::d4a1",
    "status": "RUNNING"
  }
}

Launch run

Start a run of a job, with optional run config and tags. It returns as soon as the run is queued; use 'Get run' to follow it.

Inputs

JobjobtextRequired
The job. Pick one, or give its name or a value from an earlier step.
Run configrun_configobject
Settings for this run, in the shape the job expects, such as {"ops": {"load": {"config": {"days": 3}}}}. Leave empty to use the job's defaults.
Tagstagsobject
Tags to put on the run, each a name and a value.

Outputs

runobject
The run
Example output
{
  "run": {
    "created_at": "2026-10-20T05:00:00Z",
    "ended_at": "2026-10-20T05:03:10Z",
    "is_finished": false,
    "job_name": "daily_etl",
    "parent_run_id": "",
    "root_run_id": "",
    "run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
    "started_at": "2026-10-20T05:00:04Z",
    "status": "QUEUED",
    "tags": [
      {
        "key": "dagster/schedule_name",
        "value": "daily"
      }
    ],
    "updated_at": "2026-10-20T05:03:10Z",
    "url": "https://acme.dagster.cloud/prod/runs/3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a"
  }
}

List assets

List assets with their group and when each was last built. Gets one page; to see more, run it again with the next page it gives.

Inputs

Page sizelimitnumber
How many to return, 1 to 100.From 1 to 100.
Next page cursorcursortext
The 'next_cursor' from an earlier page, to get the page after it.

Outputs

assetslist
The assets
countnumber
How many on this page
next_cursortext
Pass as 'cursor' for the next page; empty on the last one
Example output
{
  "assets": [
    {
      "description": "All orders",
      "group": "analytics",
      "is_materializable": true,
      "is_partitioned": false,
      "job_names": [
        "daily_etl"
      ],
      "key": "analytics/orders",
      "last_materialization_run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
      "last_materialized_at": "2026-10-20T05:03:09Z",
      "path": [
        "analytics",
        "orders"
      ]
    }
  ],
  "count": 1,
  "next_cursor": ""
}

List code locations

List the code locations deployed to the deployment, with whether each loaded and any error it hit.

Inputs

None.

Outputs

code_locationslist
The locations
countnumber
How many there are
Example output
{
  "code_locations": [
    {
      "error": "",
      "load_status": "LOADED",
      "name": "analytics",
      "repositories": [
        "__repository__"
      ]
    }
  ],
  "count": 1
}

List jobs

List every job in every code location.

Inputs

None.

Outputs

countnumber
How many there are
jobslist
The jobs
Example output
{
  "count": 1,
  "jobs": [
    {
      "code_location": "analytics",
      "description": "Loads the day's orders",
      "key": "analytics/__repository__/daily_etl",
      "name": "daily_etl",
      "repository": "__repository__"
    }
  ]
}

List runs

List runs, newest first, filtered by job, status, creation time or tags. Gets one page; to see more, run it again with the next page it gives.

Inputs

Jobjobtext
Only runs of this job.
Statusstatuseslist
Only runs in one of these states. Leave empty for all.One or more of: QUEUED, NOT_STARTED (Not started), STARTING, STARTED (Running), SUCCESS (Succeeded), FAILURE (Failed), CANCELING, CANCELED.
Created aftercreated_afterdate and time
Only runs created after this time.
Created beforecreated_beforedate and time
Only runs created before this time.
Tagstagsobject
Only runs that have all of these tags.
Page sizelimitnumber
How many to return, 1 to 100.From 1 to 100.
Next page cursorcursortext
The 'next_cursor' from an earlier page, to get the page after it.

Outputs

countnumber
How many on this page
next_cursortext
Pass as 'cursor' for the next page; empty on the last one
runslist
The runs
Example output
{
  "count": 1,
  "next_cursor": "",
  "runs": [
    {
      "created_at": "2026-10-20T05:00:00Z",
      "ended_at": "2026-10-20T05:03:10Z",
      "is_finished": true,
      "job_name": "daily_etl",
      "parent_run_id": "",
      "root_run_id": "",
      "run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
      "started_at": "2026-10-20T05:00:04Z",
      "status": "SUCCESS",
      "tags": [
        {
          "key": "dagster/schedule_name",
          "value": "daily"
        }
      ],
      "updated_at": "2026-10-20T05:03:10Z",
      "url": "https://acme.dagster.cloud/prod/runs/3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a"
    }
  ]
}

List schedules

List every schedule with its cron, time zone and whether it is on.

Inputs

None.

Outputs

countnumber
How many there are
scheduleslist
The schedules
Example output
{
  "count": 1,
  "schedules": [
    {
      "code_location": "analytics",
      "cron_schedule": "0 5 * * *",
      "description": "",
      "job_name": "daily_etl",
      "key": "analytics/__repository__/daily",
      "name": "daily",
      "repository": "__repository__",
      "state_id": "9a1f::c3d2",
      "status": "RUNNING",
      "timezone": "UTC"
    }
  ]
}

List sensors

List every sensor with the jobs it runs and whether it is on.

Inputs

None.

Outputs

countnumber
How many there are
sensorslist
The sensors
Example output
{
  "count": 1,
  "sensors": [
    {
      "code_location": "analytics",
      "description": "",
      "job_names": [
        "daily_etl"
      ],
      "key": "analytics/__repository__/new_files",
      "name": "new_files",
      "repository": "__repository__",
      "sensor_type": "STANDARD",
      "state_id": "7b2e::d4a1",
      "status": "RUNNING"
    }
  ]
}

Materialize assets

Start a run that builds the chosen assets. They must be in the same code location.

Inputs

AssetsassetslistRequired
The assets to build. Pick them, or type their keys.
Run configrun_configobject
Settings for this run, in the shape the job expects, such as {"ops": {"load": {"config": {"days": 3}}}}. Leave empty to use the job's defaults.
Tagstagsobject
Tags to put on the run, each a name and a value.

Outputs

assetslist
The asset keys
job_nametext
The job that was run
runobject
The run
Example output
{
  "assets": [
    "analytics/orders"
  ],
  "job_name": "__ASSET_JOB",
  "run": {
    "created_at": "2026-10-20T05:00:00Z",
    "ended_at": "2026-10-20T05:03:10Z",
    "is_finished": false,
    "job_name": "daily_etl",
    "parent_run_id": "",
    "root_run_id": "",
    "run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
    "started_at": "2026-10-20T05:00:04Z",
    "status": "QUEUED",
    "tags": [
      {
        "key": "dagster/schedule_name",
        "value": "daily"
      }
    ],
    "updated_at": "2026-10-20T05:03:10Z",
    "url": "https://acme.dagster.cloud/prod/runs/3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a"
  }
}

Run again

Start a new run that repeats an earlier one with the same config and tags, either all of it or only from the steps that failed.

Inputs

Run IDrun_idtextRequired
The run's id, from 'Launch run', 'List runs' or an earlier step.
What to runstrategytext
Everything, or only from the failed steps.One of: ALL_STEPS (Run everything again (default)), FROM_FAILURE (Only the steps that failed, and what depends on them). Default: ALL_STEPS.

Outputs

runobject
The run
Example output
{
  "run": {
    "created_at": "2026-10-20T05:00:00Z",
    "ended_at": "2026-10-20T05:03:10Z",
    "is_finished": false,
    "job_name": "daily_etl",
    "parent_run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
    "root_run_id": "",
    "run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
    "started_at": "2026-10-20T05:00:04Z",
    "status": "QUEUED",
    "tags": [
      {
        "key": "dagster/schedule_name",
        "value": "daily"
      }
    ],
    "updated_at": "2026-10-20T05:03:10Z",
    "url": "https://acme.dagster.cloud/prod/runs/3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a"
  }
}

Stop run

Ask Dagster to stop a run that is queued or running. It stops a moment later; use 'Get run' to see it is canceled.

Inputs

Run IDrun_idtextRequired
The run's id, from 'Launch run', 'List runs' or an earlier step.

Outputs

runobject
The run
terminatedtrue/false
True once requested
Example output
{
  "run": {
    "created_at": "2026-10-20T05:00:00Z",
    "ended_at": "2026-10-20T05:03:10Z",
    "is_finished": false,
    "job_name": "daily_etl",
    "parent_run_id": "",
    "root_run_id": "",
    "run_id": "3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a",
    "started_at": "2026-10-20T05:00:04Z",
    "status": "CANCELING",
    "tags": [
      {
        "key": "dagster/schedule_name",
        "value": "daily"
      }
    ],
    "updated_at": "2026-10-20T05:03:10Z",
    "url": "https://acme.dagster.cloud/prod/runs/3f2b8c1e-5d7a-4c1e-9b0a-1f2e3d4c5b6a"
  },
  "terminated": true
}

Turn schedule off

Turn a schedule off. Nothing happens if it is already off.

Inputs

SchedulescheduletextRequired
The schedule. Pick one, or give its name.

Outputs

scheduleobject
The schedule
Example output
{
  "schedule": {
    "code_location": "analytics",
    "cron_schedule": "0 5 * * *",
    "description": "",
    "job_name": "daily_etl",
    "key": "analytics/__repository__/daily",
    "name": "daily",
    "repository": "__repository__",
    "state_id": "9a1f::c3d2",
    "status": "STOPPED",
    "timezone": "UTC"
  }
}

Turn schedule on

Turn a schedule on. Nothing happens if it is already on.

Inputs

SchedulescheduletextRequired
The schedule. Pick one, or give its name.

Outputs

scheduleobject
The schedule
Example output
{
  "schedule": {
    "code_location": "analytics",
    "cron_schedule": "0 5 * * *",
    "description": "",
    "job_name": "daily_etl",
    "key": "analytics/__repository__/daily",
    "name": "daily",
    "repository": "__repository__",
    "state_id": "9a1f::c3d2",
    "status": "RUNNING",
    "timezone": "UTC"
  }
}

Turn sensor off

Turn a sensor off. Nothing happens if it is already off.

Inputs

SensorsensortextRequired
The sensor. Pick one, or give its name.

Outputs

sensorobject
The sensor
Example output
{
  "sensor": {
    "code_location": "analytics",
    "description": "",
    "job_names": [
      "daily_etl"
    ],
    "key": "analytics/__repository__/new_files",
    "name": "new_files",
    "repository": "__repository__",
    "sensor_type": "STANDARD",
    "state_id": "7b2e::d4a1",
    "status": "STOPPED"
  }
}

Turn sensor on

Turn a sensor on. Nothing happens if it is already on.

Inputs

SensorsensortextRequired
The sensor. Pick one, or give its name.

Outputs

sensorobject
The sensor
Example output
{
  "sensor": {
    "code_location": "analytics",
    "description": "",
    "job_names": [
      "daily_etl"
    ],
    "key": "analytics/__repository__/new_files",
    "name": "new_files",
    "repository": "__repository__",
    "sensor_type": "STANDARD",
    "state_id": "7b2e::d4a1",
    "status": "RUNNING"
  }
}

On this page