NASA POWER
App · 13 actions
NASA's free solar, weather and climate data for any point on Earth: hourly, daily and monthly temperature, sunlight, rain, wind, humidity and over a hundred more values from 1981 to the last few days, long-term averages, values across a whole region, wind roses, ASHRAE climate zones and building design conditions. Used for solar energy, agriculture and building design. No account or API key required.
Actions
| Action | What it does |
|---|---|
| Get climate design conditions | Get the ASHRAE climatic design conditions for a place, the figures engineers size heating and cooling with: heating and cooling design temperatures, humidity and enthalpy figures, extreme temperatures and winds, and month by month degree days, temperatures, rainfall and solar radiation. |
| Get climate zone | Find a place's ASHRAE 169 climate zone, the one building energy codes use, worked out from NASA's data for a period: a thermal zone from 0 (extremely hot) to 8 (subarctic) and a moisture letter, A (humid), B (dry) or C (marine), such as 3A. |
| Get climatology | Get the long-term average for each month of the year and for the whole year at a place on Earth: what a typical January or July is like for temperature, sunlight, rain or wind. |
| Get daily data | Get day by day values for a place on Earth, such as temperature, rainfall, sunlight, humidity or wind, from 1981 to the last few days. |
| Get data availability | Find out how far each of NASA POWER's data sets reaches: the last day with weather, solar and rainfall data, and how many days behind today each runs. |
| Get hourly data | Get hour by hour values for a place on Earth, such as temperature, sunlight or wind speed, from 2001 to the last few days. |
| Get monthly data | Get month by month values for a place on Earth, with a figure for each whole year, from 1981 to this year: average temperatures, total rainfall, sunlight and more. |
| Get parameter details | Look up one parameter by its code, such as T2M: its name, what it measures, and at which time steps (hourly, daily, monthly, climatology) and for which communities it is available. |
| Get regional climatology | Get the long-term average for each month and the year of one parameter for every cell of NASA's grid in a region 2 to 10 degrees across, over NASA's standard period: for example where a state gets the most sunlight. |
| Get regional daily data | Get day by day values of one parameter for every cell of NASA's grid in a region 2 to 10 degrees across, such as a state's temperatures. |
| Get regional monthly data | Get month by month values, with a figure for each year, of one parameter for every cell of NASA's grid in a region 2 to 10 degrees across. |
| Get wind rose | Get a wind rose for a place and period, at 10 m and 50 m above the ground: how often the wind blows from each of 16 directions, its average speed from each, and how the time splits across 10 speed classes, plus the prevailing direction. |
| List parameters | List the parameters NASA POWER has for a time step and community (about 150 daily ones: temperatures, sunlight, rain, wind, humidity, soil moisture and more), each with its code, units, group and definition. |
Get climate design conditions
Get the ASHRAE climatic design conditions for a place, the figures engineers size heating and cooling with: heating and cooling design temperatures, humidity and enthalpy figures, extreme temperatures and winds, and month by month degree days, temperatures, rainfall and solar radiation. Metric units. Takes about 10 seconds. No API key required.
Inputs
- Latitude
latitudenumberRequired - How far north (positive) or south (negative) of the equator, from -90 to 90. For example 37.08 for Hampton, Virginia.From -90 to 90.
- Longitude
longitudenumberRequired - How far east (positive) or west (negative) of Greenwich, from -180 to 180. For example -76.35 for Hampton, Virginia.From -180 to 180.
- Start year
start_yearnumber - The first year of the period, from 2001. Leave both years empty for NASA's standard period (2001 to the latest full year).From 2001 to 2025.
- End year
end_yearnumber - The last year of the period, a year that has ended. The period must cover at least 5 years.From 2001 to 2025.
Outputs
annual_precipitation_mmnumber- The average precipitation in a year, in millimetres.
average_temperaturenumber- The average dry bulb temperature, in C.
average_wind_speednumber- The average wind speed at 10 m, in m/s.
coldest_monthtext- The coldest month, such as January.
conditionslist- Every yearly design figure, in the order of the ASHRAE table.
cooling_degree_daysnumber- Cooling degree days in a year, base 18.3 C (65 F).
cooling_design_temperaturenumber- The cooling design dry bulb temperature (0.4%), in C: only 0.4% of hours in a year are hotter.
cooling_design_wet_bulbnumber- The mean coincident wet bulb temperature at the cooling design temperature, in C.
elevation_mnumber- The ground height of NASA's grid cell at that point, in metres above sea level.
end_yearnumber- The last year the conditions cover.
heating_degree_daysnumber- Heating degree days in a year, base 18.3 C (65 F).
heating_design_temperaturenumber- The heating design dry bulb temperature (99.6%), in C: only 0.4% of hours in a year are colder.
hottest_monthtext- The hottest month, such as July.
latitudenumber- The latitude asked about, in decimal degrees (north is positive).
longitudenumber- The longitude asked about, in decimal degrees (east is positive).
monthly_conditionslist- The month by month figures, each with its yearly figure where there is one.
standard_pressure_kpanumber- The standard air pressure at that elevation, in kPa.
start_yearnumber- The first year the conditions cover.
utc_offset_hoursnumber- The place's standard time zone offset from UTC, in hours. Empty when NASA POWER doesn't give one.
Example output
{
"annual_precipitation_mm": 1185.5,
"average_temperature": 16.3,
"average_wind_speed": 4.7,
"coldest_month": "January",
"conditions": [
{
"code": "CD_DB_996",
"group": "Heating",
"name": "Heating design dry bulb temperature, 99.6%",
"units": "C",
"value": -4.3
},
{
"code": "CD_DB_990",
"group": "Heating",
"name": "Heating design dry bulb temperature, 99%",
"units": "C",
"value": -2.2
},
{
"code": "CD_DB_004",
"group": "Cooling",
"name": "Cooling design dry bulb temperature, 0.4%",
"units": "C",
"value": 33.4
},
{
"code": "CD_MCWB_004",
"group": "Cooling",
"name": "Cooling mean coincident wet bulb, 0.4%",
"units": "C",
"value": 27.7
},
{
"code": "CD_DP_004",
"group": "Dehumidification",
"name": "Dehumidification dew point, 0.4%",
"units": "C",
"value": 25.2
},
{
"code": "CD_EXT_WS_010",
"group": "Extremes",
"name": "Extreme annual wind speed, 1%",
"units": "m/s",
"value": 11.1
}
],
"cooling_degree_days": 996.2,
"cooling_design_temperature": 33.4,
"cooling_design_wet_bulb": 27.7,
"elevation_m": 6.58,
"end_year": 2025,
"heating_degree_days": 1732.2,
"heating_design_temperature": -4.3,
"hottest_month": "July",
"latitude": 37.08,
"longitude": -76.35,
"monthly_conditions": [
{
"annual": 16.3,
"code": "CD_T2M_AVG",
"name": "Average dry bulb temperature",
"units": "C",
"values": [
{
"month": "January",
"month_number": 1,
"value": 4.8
},
{
"month": "February",
"month_number": 2,
"value": 6.9
},
{
"month": "March",
"month_number": 3,
"value": 9.8
},
{
"month": "April",
"month_number": 4,
"value": 14.6
},
{
"month": "May",
"month_number": 5,
"value": 19.5
},
{
"month": "June",
"month_number": 6,
"value": 24.3
},
{
"month": "July",
"month_number": 7,
"value": 27.4
},
{
"month": "August",
"month_number": 8,
"value": 26.3
},
{
"month": "September",
"month_number": 9,
"value": 23.7
},
{
"month": "October",
"month_number": 10,
"value": 18.4
},
{
"month": "November",
"month_number": 11,
"value": 12.0
},
{
"month": "December",
"month_number": 12,
"value": 7.2
}
]
},
{
"annual": 1732.2,
"code": "CD_HDD18",
"name": "Heating degree days, base 18.3 C",
"units": "C-days",
"values": [
{
"month": "January",
"month_number": 1,
"value": 417.9
},
{
"month": "February",
"month_number": 2,
"value": 323.6
},
{
"month": "March",
"month_number": 3,
"value": 263.2
},
{
"month": "April",
"month_number": 4,
"value": 121.5
},
{
"month": "May",
"month_number": 5,
"value": 27.7
},
{
"month": "June",
"month_number": 6,
"value": 0.5
},
{
"month": "July",
"month_number": 7,
"value": 0.0
},
{
"month": "August",
"month_number": 8,
"value": 0.0
},
{
"month": "September",
"month_number": 9,
"value": 0.4
},
{
"month": "October",
"month_number": 10,
"value": 41.2
},
{
"month": "November",
"month_number": 11,
"value": 193.4
},
{
"month": "December",
"month_number": 12,
"value": 342.9
}
]
}
],
"standard_pressure_kpa": 101.25,
"start_year": 2016,
"utc_offset_hours": -5.0
}Get climate zone
Find a place's ASHRAE 169 climate zone, the one building energy codes use, worked out from NASA's data for a period: a thermal zone from 0 (extremely hot) to 8 (subarctic) and a moisture letter, A (humid), B (dry) or C (marine), such as 3A. Takes about 10 seconds. No API key required.
Inputs
- Latitude
latitudenumberRequired - How far north (positive) or south (negative) of the equator, from -90 to 90. For example 37.08 for Hampton, Virginia.From -90 to 90.
- Longitude
longitudenumberRequired - How far east (positive) or west (negative) of Greenwich, from -180 to 180. For example -76.35 for Hampton, Virginia.From -180 to 180.
- Start year
start_yearnumberRequired - The first year to work the zone out from, from 1981.From 1981 to 2025.
- End year
end_yearnumberRequired - The last year, a year that has ended, at least one year after the start. Ten years or more gives a steadier answer.From 1981 to 2025.
Outputs
climate_zonetext- The ASHRAE 169 climate zone, such as 3A or 8. Empty when NASA POWER has none for the place.
elevation_mnumber- The ground height of NASA's grid cell at that point, in metres above sea level.
end_yearnumber- The last year the zone was worked out from.
latitudenumber- The latitude asked about, in decimal degrees (north is positive).
longitudenumber- The longitude asked about, in decimal degrees (east is positive).
moisture_zonetext- The moisture letter: A, B or C. Empty for zones 7 and 8, which have none.
moisture_zone_nametext- Humid (A), Dry (B) or Marine (C).
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
start_yearnumber- The first year the zone was worked out from.
summarytext- One sentence with the zone, for a message.
thermal_zonenumber- The thermal zone, 0 (hottest) to 8 (coldest).
thermal_zone_nametext- The thermal zone's name, such as Warm or Very cold.
Example output
{
"climate_zone": "3A",
"elevation_m": 6.58,
"end_year": 2025,
"latitude": 37.08,
"longitude": -76.35,
"moisture_zone": "A",
"moisture_zone_name": "Humid",
"service": "POWER Zones API v2.9.2",
"start_year": 2016,
"summary": "ASHRAE climate zone 3A (warm, humid), from 2016 to 2025.",
"thermal_zone": 3,
"thermal_zone_name": "Warm"
}Get climatology
Get the long-term average for each month of the year and for the whole year at a place on Earth: what a typical January or July is like for temperature, sunlight, rain or wind. NASA's standard period runs from 2001 to the latest full year; give a start and end year for another one. Up to 20 parameters per step. No API key required.
Inputs
- Latitude
latitudenumberRequired - How far north (positive) or south (negative) of the equator, from -90 to 90. For example 37.08 for Hampton, Virginia.From -90 to 90.
- Longitude
longitudenumberRequired - How far east (positive) or west (negative) of Greenwich, from -180 to 180. For example -76.35 for Hampton, Virginia.From -180 to 180.
- Parameters
parameterslistRequired - What to get, up to 20. The list shows each parameter's name, code and units for the community. Codes from an earlier step work too, such as T2M (temperature) or ALLSKY_SFC_SW_DWN (sunlight); 'List parameters' describes them all.
- Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric. - Start year
start_yearnumber - The first year of a custom period, from 1981. Leave both years empty for NASA's standard period.From 1981 to 2025.
- End year
end_yearnumber - The last year of a custom period, a year that has ended, at least one year after the start. Leave it empty to run to the latest full year.From 1981 to 2025.
- Site elevation (m)
site_elevationnumber - The site's height above sea level in metres, when it differs from NASA's grid cell (the answer gives the cell's). Fill it in to also get PSC, the surface pressure corrected to that height.From -500.0 to 9000.0.
- Wind height (m)
wind_heightnumber - A height above the ground from 10 to 300 metres, such as a wind turbine's hub. Fill it in with Wind surface to also get WSC, the wind speed corrected to that height and ground.From 10.0 to 300.0.
- Wind surface
wind_surfacetext - The kind of ground around the site, which sets how much it slows the wind: open water, grass, crops, forest and so on. Needed with Wind height.
Outputs
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
elevation_mnumber- The ground height of NASA's grid cell at that point, in metres above sea level.
end_yearnumber- The last year the averages cover.
latitudenumber- The latitude asked about, in decimal degrees (north is positive).
longitudenumber- The longitude asked about, in decimal degrees (east is positive).
noteslist- NASA POWER's own notes on the answer, such as the period a climatology covers or the surface a corrected wind speed used.
parameter_countnumber- How many parameters came back. Can be more than were asked for: a site elevation adds PSC, a wind height adds WSC, and some codes stand for a set.
parameterslist- One entry per parameter, in the order asked for, each with its rows.
periodtext- NASA's description of the period, such as 25-year ... (January 2001 - December 2025).
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
sourceslist- The data sets the values come from, such as MERRA2 (weather) and SYN1DEG (satellite solar).
start_yearnumber- The first year the averages cover.
unit_systemtext- metric or imperial: the unit system the values are in.
Example output
{
"community": "RE",
"elevation_m": 6.58,
"end_year": 2025,
"latitude": 37.08,
"longitude": -76.35,
"notes": [
"The requested parameters are retrieved from a pre-computed climatological period (January 2001 - December 2025)"
],
"parameter_count": 2,
"parameters": [
{
"annual": 15.61,
"code": "T2M",
"maximum": 26.61,
"minimum": 4.18,
"missing": 0,
"name": "Temperature at 2 Meters",
"units": "C",
"values": [
{
"month": "January",
"month_number": 1,
"value": 4.18
},
{
"month": "February",
"month_number": 2,
"value": 5.18
},
{
"month": "March",
"month_number": 3,
"value": 8.52
},
{
"month": "April",
"month_number": 4,
"value": 13.97
},
{
"month": "May",
"month_number": 5,
"value": 19.07
},
{
"month": "June",
"month_number": 6,
"value": 24.21
},
{
"month": "July",
"month_number": 7,
"value": 26.61
},
{
"month": "August",
"month_number": 8,
"value": 25.96
},
{
"month": "September",
"month_number": 9,
"value": 23.01
},
{
"month": "October",
"month_number": 10,
"value": 17.53
},
{
"month": "November",
"month_number": 11,
"value": 11.46
},
{
"month": "December",
"month_number": 12,
"value": 7.07
}
]
},
{
"annual": 4.307,
"code": "ALLSKY_SFC_SW_DWN",
"maximum": 6.4224,
"minimum": 2.0491,
"missing": 0,
"name": "All Sky Surface Shortwave Downward Irradiance",
"units": "kW-hr/m^2/day",
"values": [
{
"month": "January",
"month_number": 1,
"value": 2.3215
},
{
"month": "February",
"month_number": 2,
"value": 3.0922
},
{
"month": "March",
"month_number": 3,
"value": 4.1561
},
{
"month": "April",
"month_number": 4,
"value": 5.2865
},
{
"month": "May",
"month_number": 5,
"value": 5.9354
},
{
"month": "June",
"month_number": 6,
"value": 6.4224
},
{
"month": "July",
"month_number": 7,
"value": 6.2215
},
{
"month": "August",
"month_number": 8,
"value": 5.5152
},
{
"month": "September",
"month_number": 9,
"value": 4.5166
},
{
"month": "October",
"month_number": 10,
"value": 3.4783
},
{
"month": "November",
"month_number": 11,
"value": 2.6335
},
{
"month": "December",
"month_number": 12,
"value": 2.0491
}
]
}
],
"period": "25-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2025)",
"service": "POWER Climatology API v2.10.1",
"sources": [
"MERRA2",
"SYN1DEG"
],
"start_year": 2001,
"unit_system": "metric"
}Get daily data
Get day by day values for a place on Earth, such as temperature, rainfall, sunlight, humidity or wind, from 1981 to the last few days. Up to 20 parameters and 366 days per step, to keep the result a usable size. Each parameter comes back with its name, units, a row per day (missing values empty) and its average, minimum and maximum. No API key required.
Inputs
- Latitude
latitudenumberRequired - How far north (positive) or south (negative) of the equator, from -90 to 90. For example 37.08 for Hampton, Virginia.From -90 to 90.
- Longitude
longitudenumberRequired - How far east (positive) or west (negative) of Greenwich, from -180 to 180. For example -76.35 for Hampton, Virginia.From -180 to 180.
- Parameters
parameterslistRequired - What to get, up to 20. The list shows each parameter's name, code and units for the community. Codes from an earlier step work too, such as T2M (temperature) or ALLSKY_SFC_SW_DWN (sunlight); 'List parameters' describes them all.
- Start date
start_datedateRequired - The first day, from 1 January 1981.
- End date
end_datedateRequired - The last day, at most 366 days after the start. The latest days fill in over the following week or so (solar values take longer).
- Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Time standard
time_standardtext - The clock the days and hours follow: local solar time (noon is when the sun is highest, which can differ from the local time zone) or UTC. Local solar time if left empty.One of:
LST(Local solar time (the sun's clock at that longitude)),UTC. Default:LST. - Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric. - Site elevation (m)
site_elevationnumber - The site's height above sea level in metres, when it differs from NASA's grid cell (the answer gives the cell's). Fill it in to also get PSC, the surface pressure corrected to that height.From -500.0 to 9000.0.
- Wind height (m)
wind_heightnumber - A height above the ground from 10 to 300 metres, such as a wind turbine's hub. Fill it in with Wind surface to also get WSC, the wind speed corrected to that height and ground.From 10.0 to 300.0.
- Wind surface
wind_surfacetext - The kind of ground around the site, which sets how much it slows the wind: open water, grass, crops, forest and so on. Needed with Wind height.
Outputs
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
elevation_mnumber- The ground height of NASA's grid cell at that point, in metres above sea level.
end_datetext- The last day asked for, as YYYY-MM-DD.
latitudenumber- The latitude asked about, in decimal degrees (north is positive).
longitudenumber- The longitude asked about, in decimal degrees (east is positive).
noteslist- NASA POWER's own notes on the answer, such as the period a climatology covers or the surface a corrected wind speed used.
parameter_countnumber- How many parameters came back. Can be more than were asked for: a site elevation adds PSC, a wind height adds WSC, and some codes stand for a set.
parameterslist- One entry per parameter, in the order asked for, each with its rows.
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
sourceslist- The data sets the values come from, such as MERRA2 (weather) and SYN1DEG (satellite solar).
start_datetext- The first day asked for, as YYYY-MM-DD.
time_standardtext- LST (local solar time, the sun's own clock at that longitude) or UTC: the clock the dates and hours follow.
unit_systemtext- metric or imperial: the unit system the values are in.
Example output
{
"community": "RE",
"elevation_m": 6.58,
"end_date": "2025-07-03",
"latitude": 37.08,
"longitude": -76.35,
"notes": [],
"parameter_count": 2,
"parameters": [
{
"average": 27.7933,
"code": "T2M",
"count": 3,
"maximum": 29.39,
"minimum": 25.92,
"missing": 0,
"name": "Temperature at 2 Meters",
"units": "C",
"values": [
{
"date": "2025-07-01",
"value": 29.39
},
{
"date": "2025-07-02",
"value": 25.92
},
{
"date": "2025-07-03",
"value": 28.07
}
]
},
{
"average": 7.4867,
"code": "PRECTOTCORR",
"count": 3,
"maximum": 20.91,
"minimum": 0.74,
"missing": 0,
"name": "Precipitation Corrected",
"units": "mm/day",
"values": [
{
"date": "2025-07-01",
"value": 0.81
},
{
"date": "2025-07-02",
"value": 20.91
},
{
"date": "2025-07-03",
"value": 0.74
}
]
}
],
"service": "POWER Daily API v2.10.0",
"sources": [
"SYN1DEG",
"MERRA2"
],
"start_date": "2025-07-01",
"time_standard": "LST",
"unit_system": "metric"
}Get data availability
Find out how far each of NASA POWER's data sets reaches: the last day with weather, solar and rainfall data, and how many days behind today each runs. Useful before asking for the most recent days. No API key required.
Inputs
None.
Outputs
latest_datetext- The most recent day any current data set reaches. Weather and solar values can lag it: check the data set a parameter comes from.
source_countnumber- How many data sets are listed.
sourceslist- Each data set NASA POWER draws on and how far it reaches.
summarytext- One sentence with how far each current data set reaches.
Example output
{
"latest_date": "2026-10-19",
"source_count": 6,
"sources": [
{
"covers": "Meteorology (NASA GMAO reanalysis, 1981 onwards)",
"days_available": 16709,
"last_date": "2026-09-30",
"latency_days": 21,
"name": "MERRA-2",
"source": "merra2"
},
{
"covers": "Meteorology for the most recent weeks (NASA GMAO)",
"days_available": 16727,
"last_date": "2026-10-18",
"latency_days": 3,
"name": "GEOS-IT",
"source": "geosit"
},
{
"covers": "Solar (satellite, 2001 onwards)",
"days_available": 16647,
"last_date": "2026-07-30",
"latency_days": 83,
"name": "CERES SYN1deg",
"source": "syn1deg"
},
{
"covers": "Solar for the most recent months (satellite)",
"days_available": 16725,
"last_date": "2026-10-16",
"latency_days": 5,
"name": "CERES FLASHFlux",
"source": "flashflux"
},
{
"covers": "Precipitation (satellite)",
"days_available": 16728,
"last_date": "2026-10-19",
"latency_days": 2,
"name": "GPM IMERG",
"source": "imerg"
},
{
"covers": "Solar before 2001 (satellite, 1984 to 2000)",
"days_available": 7305,
"last_date": "2000-12-31",
"latency_days": null,
"name": "GEWEX SRB",
"source": "srb"
}
],
"summary": "Latest data: MERRA-2 to 2026-09-30 (21 days behind); GEOS-IT to 2026-10-18 (3 days behind); CERES SYN1deg to 2026-07-30 (83 days behind); CERES FLASHFlux to 2026-10-16 (5 days behind); GPM IMERG to 2026-10-19 (2 days behind)."
}Get hourly data
Get hour by hour values for a place on Earth, such as temperature, sunlight or wind speed, from 2001 to the last few days. Up to 15 parameters and 31 days per step, to keep the result a usable size. Each parameter comes back with its name, units, a row per hour (missing values empty) and its average, minimum and maximum. No API key required.
Inputs
- Latitude
latitudenumberRequired - How far north (positive) or south (negative) of the equator, from -90 to 90. For example 37.08 for Hampton, Virginia.From -90 to 90.
- Longitude
longitudenumberRequired - How far east (positive) or west (negative) of Greenwich, from -180 to 180. For example -76.35 for Hampton, Virginia.From -180 to 180.
- Parameters
parameterslistRequired - What to get, up to 15. The list shows each parameter's name, code and units for the community. Codes from an earlier step work too, such as T2M (temperature) or ALLSKY_SFC_SW_DWN (sunlight); 'List parameters' describes them all.
- Start date
start_datedateRequired - The first day, from 1 January 2001.
- End date
end_datedateRequired - The last day, at most 31 days after the start. The latest days fill in over the following week or so.
- Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Time standard
time_standardtext - The clock the days and hours follow: local solar time (noon is when the sun is highest, which can differ from the local time zone) or UTC. Local solar time if left empty.One of:
LST(Local solar time (the sun's clock at that longitude)),UTC. Default:LST. - Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric. - Site elevation (m)
site_elevationnumber - The site's height above sea level in metres, when it differs from NASA's grid cell (the answer gives the cell's). Fill it in to also get PSC, the surface pressure corrected to that height.From -500.0 to 9000.0.
- Wind height (m)
wind_heightnumber - A height above the ground from 10 to 300 metres, such as a wind turbine's hub. Fill it in with Wind surface to also get WSC, the wind speed corrected to that height and ground.From 10.0 to 300.0.
- Wind surface
wind_surfacetext - The kind of ground around the site, which sets how much it slows the wind: open water, grass, crops, forest and so on. Needed with Wind height.
Outputs
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
elevation_mnumber- The ground height of NASA's grid cell at that point, in metres above sea level.
end_datetext- The last day asked for, as YYYY-MM-DD.
latitudenumber- The latitude asked about, in decimal degrees (north is positive).
longitudenumber- The longitude asked about, in decimal degrees (east is positive).
noteslist- NASA POWER's own notes on the answer, such as the period a climatology covers or the surface a corrected wind speed used.
parameter_countnumber- How many parameters came back. Can be more than were asked for: a site elevation adds PSC, a wind height adds WSC, and some codes stand for a set.
parameterslist- One entry per parameter, in the order asked for, each with its rows.
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
sourceslist- The data sets the values come from, such as MERRA2 (weather) and SYN1DEG (satellite solar).
start_datetext- The first day asked for, as YYYY-MM-DD.
time_standardtext- LST (local solar time, the sun's own clock at that longitude) or UTC: the clock the dates and hours follow.
unit_systemtext- metric or imperial: the unit system the values are in.
Example output
{
"community": "RE",
"elevation_m": 6.58,
"end_date": "2025-07-01",
"latitude": 37.08,
"longitude": -76.35,
"notes": [],
"parameter_count": 2,
"parameters": [
{
"average": 32.1275,
"code": "T2M",
"count": 4,
"maximum": 32.99,
"minimum": 30.98,
"missing": 0,
"name": "Temperature at 2 Meters",
"units": "C",
"values": [
{
"date_time": "2025-07-01T14:00",
"value": 30.98
},
{
"date_time": "2025-07-01T15:00",
"value": 31.95
},
{
"date_time": "2025-07-01T16:00",
"value": 32.59
},
{
"date_time": "2025-07-01T17:00",
"value": 32.99
}
]
},
{
"average": 850.4325,
"code": "ALLSKY_SFC_SW_DWN",
"count": 4,
"maximum": 909.03,
"minimum": 767.45,
"missing": 0,
"name": "All Sky Surface Shortwave Downward Irradiance",
"units": "Wh/m^2",
"values": [
{
"date_time": "2025-07-01T14:00",
"value": 767.45
},
{
"date_time": "2025-07-01T15:00",
"value": 862.78
},
{
"date_time": "2025-07-01T16:00",
"value": 909.03
},
{
"date_time": "2025-07-01T17:00",
"value": 862.47
}
]
}
],
"service": "POWER Hourly API v2.10.3",
"sources": [
"SYN1DEG",
"MERRA2",
"POWER"
],
"start_date": "2025-07-01",
"time_standard": "UTC",
"unit_system": "metric"
}Get monthly data
Get month by month values for a place on Earth, with a figure for each whole year, from 1981 to this year: average temperatures, total rainfall, sunlight and more. Up to 20 parameters per step. Each parameter comes back with its name, units, a row per month, a row per year and its average, minimum and maximum. No API key required.
Inputs
- Latitude
latitudenumberRequired - How far north (positive) or south (negative) of the equator, from -90 to 90. For example 37.08 for Hampton, Virginia.From -90 to 90.
- Longitude
longitudenumberRequired - How far east (positive) or west (negative) of Greenwich, from -180 to 180. For example -76.35 for Hampton, Virginia.From -180 to 180.
- Parameters
parameterslistRequired - What to get, up to 20. The list shows each parameter's name, code and units for the community. Codes from an earlier step work too, such as T2M (temperature) or ALLSKY_SFC_SW_DWN (sunlight); 'List parameters' describes them all.
- Start year
start_yearnumberRequired - The first year, from 1981.From 1981 to 2026.
- End year
end_yearnumberRequired - The last year, up to this one (its months so far).From 1981 to 2026.
- Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric. - Site elevation (m)
site_elevationnumber - The site's height above sea level in metres, when it differs from NASA's grid cell (the answer gives the cell's). Fill it in to also get PSC, the surface pressure corrected to that height.From -500.0 to 9000.0.
- Wind height (m)
wind_heightnumber - A height above the ground from 10 to 300 metres, such as a wind turbine's hub. Fill it in with Wind surface to also get WSC, the wind speed corrected to that height and ground.From 10.0 to 300.0.
- Wind surface
wind_surfacetext - The kind of ground around the site, which sets how much it slows the wind: open water, grass, crops, forest and so on. Needed with Wind height.
Outputs
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
elevation_mnumber- The ground height of NASA's grid cell at that point, in metres above sea level.
end_yearnumber- The last year asked for.
latitudenumber- The latitude asked about, in decimal degrees (north is positive).
longitudenumber- The longitude asked about, in decimal degrees (east is positive).
noteslist- NASA POWER's own notes on the answer, such as the period a climatology covers or the surface a corrected wind speed used.
parameter_countnumber- How many parameters came back. Can be more than were asked for: a site elevation adds PSC, a wind height adds WSC, and some codes stand for a set.
parameterslist- One entry per parameter, in the order asked for, each with its rows.
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
sourceslist- The data sets the values come from, such as MERRA2 (weather) and SYN1DEG (satellite solar).
start_yearnumber- The first year asked for.
unit_systemtext- metric or imperial: the unit system the values are in.
Example output
{
"community": "AG",
"elevation_m": 6.58,
"end_year": 2024,
"latitude": 37.08,
"longitude": -76.35,
"notes": [],
"parameter_count": 1,
"parameters": [
{
"annual": [
{
"value": 16.54,
"year": 2024
}
],
"average": 16.5125,
"code": "T2M",
"count": 12,
"maximum": 27.01,
"minimum": 5.84,
"missing": 0,
"name": "Temperature at 2 Meters",
"units": "C",
"values": [
{
"month": "2024-01",
"value": 5.84
},
{
"month": "2024-02",
"value": 6.8
},
{
"month": "2024-03",
"value": 10.69
},
{
"month": "2024-04",
"value": 14.68
},
{
"month": "2024-05",
"value": 20.21
},
{
"month": "2024-06",
"value": 25.6
},
{
"month": "2024-07",
"value": 27.01
},
{
"month": "2024-08",
"value": 25.62
},
{
"month": "2024-09",
"value": 23.01
},
{
"month": "2024-10",
"value": 17.86
},
{
"month": "2024-11",
"value": 13.88
},
{
"month": "2024-12",
"value": 6.95
}
]
}
],
"service": "POWER Monthly and Annual API v2.10.0",
"sources": [
"MERRA2"
],
"start_year": 2024,
"unit_system": "metric"
}Get parameter details
Look up one parameter by its code, such as T2M: its name, what it measures, and at which time steps (hourly, daily, monthly, climatology) and for which communities it is available. No API key required.
Inputs
- Parameter
parametertextRequired - The parameter's code. Pick it from the list of daily parameters, or type any code, such as T2M or CDD18_3.
Outputs
availabilitylist- One row per time step it is available at.
categorytext- NASA's category, such as Meteorology or Radiation.
codetext- The parameter's code, such as T2M, as every parameter field takes it.
communitieslist- The communities that offer it (AG, RE, SB).
definitiontext- What it measures, in NASA's words.
nametext- The parameter's name, such as Temperature at 2 Meters.
time_stepslist- The time steps it is available at: hourly, daily, monthly, climatology.
Example output
{
"availability": [
{
"calculated": false,
"communities": [
"AG",
"RE",
"SB"
],
"definition": "The average air (dry bulb) temperature at 2 meters above the surface of the earth.",
"name": "Temperature at 2 Meters",
"time_step": "hourly"
},
{
"calculated": false,
"communities": [
"AG",
"RE",
"SB"
],
"definition": "The average air (dry bulb) temperature at 2 meters above the surface of the earth.",
"name": "Temperature at 2 Meters",
"time_step": "daily"
},
{
"calculated": false,
"communities": [
"AG",
"RE",
"SB"
],
"definition": "The average air (dry bulb) temperature at 2 meters above the surface of the earth.",
"name": "Temperature at 2 Meters",
"time_step": "monthly"
},
{
"calculated": false,
"communities": [
"AG",
"RE",
"SB"
],
"definition": "The average air (dry bulb) temperature at 2 meters above the surface of the earth.",
"name": "Temperature at 2 Meters",
"time_step": "climatology"
}
],
"category": "Meteorology",
"code": "T2M",
"communities": [
"AG",
"RE",
"SB"
],
"definition": "The average air (dry bulb) temperature at 2 meters above the surface of the earth.",
"name": "Temperature at 2 Meters",
"time_steps": [
"hourly",
"daily",
"monthly",
"climatology"
]
}Get regional climatology
Get the long-term average for each month and the year of one parameter for every cell of NASA's grid in a region 2 to 10 degrees across, over NASA's standard period: for example where a state gets the most sunlight. Each grid cell comes back with its location, elevation, monthly rows and yearly figure. No API key required.
Inputs
- Southern edge (latitude)
latitude_minnumberRequired - The region's southern edge, from -90 to 90. The region must be 2 to 10 degrees from south to north.From -90 to 90.
- Northern edge (latitude)
latitude_maxnumberRequired - The region's northern edge, from -90 to 90.From -90 to 90.
- Western edge (longitude)
longitude_minnumberRequired - The region's western edge, from -180 to 180. The region must be 2 to 10 degrees from west to east.From -180 to 180.
- Eastern edge (longitude)
longitude_maxnumberRequired - The region's eastern edge, from -180 to 180.From -180 to 180.
- Parameter
parametertextRequired - The one parameter to get for the region (NASA takes one at a time). Pick it from the list, or give a code such as T2M.
- Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric.
Outputs
averagenumber- The average yearly figure across the region.
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
end_yearnumber- The last year the averages cover.
grid_pointslist- One entry per cell of NASA's grid inside the region (half a degree for weather, one degree for solar), north to south then west to east.
latitude_maxnumber- The northern edge of the region.
latitude_minnumber- The southern edge of the region.
longitude_maxnumber- The eastern edge of the region.
longitude_minnumber- The western edge of the region.
maximumnumber- The highest yearly figure in the region.
minimumnumber- The lowest yearly figure in the region.
nametext- The parameter's name, such as Temperature at 2 Meters.
noteslist- NASA POWER's own notes on the answer, such as the period a climatology covers or the surface a corrected wind speed used.
parametertext- The parameter's code, such as T2M, as every parameter field takes it.
point_countnumber- How many grid cells there are.
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
sourceslist- The data sets the values come from, such as MERRA2 (weather) and SYN1DEG (satellite solar).
start_yearnumber- The first year the averages cover.
unit_systemtext- metric or imperial: the unit system the values are in.
unitstext- The parameter's units, such as C, mm/day or kW-hr/m^2/day.
Example output
{
"average": 4.3095,
"community": "RE",
"end_year": 2025,
"grid_points": [
{
"annual": 4.307,
"elevation_m": 7.45,
"latitude": 37.5,
"longitude": -76.5,
"maximum": 6.4224,
"minimum": 2.0491,
"missing": 0,
"values": [
{
"month": "January",
"month_number": 1,
"value": 2.3215
},
{
"month": "February",
"month_number": 2,
"value": 3.0922
},
{
"month": "March",
"month_number": 3,
"value": 4.1561
},
{
"month": "April",
"month_number": 4,
"value": 5.2865
},
{
"month": "May",
"month_number": 5,
"value": 5.9354
},
{
"month": "June",
"month_number": 6,
"value": 6.4224
},
{
"month": "July",
"month_number": 7,
"value": 6.2215
},
{
"month": "August",
"month_number": 8,
"value": 5.5152
},
{
"month": "September",
"month_number": 9,
"value": 4.5166
},
{
"month": "October",
"month_number": 10,
"value": 3.4783
},
{
"month": "November",
"month_number": 11,
"value": 2.6335
},
{
"month": "December",
"month_number": 12,
"value": 2.0491
}
]
},
{
"annual": 4.3121,
"elevation_m": 1.19,
"latitude": 37.5,
"longitude": -75.5,
"maximum": 6.4582,
"minimum": 1.9721,
"missing": 0,
"values": [
{
"month": "January",
"month_number": 1,
"value": 2.2524
},
{
"month": "February",
"month_number": 2,
"value": 3.0576
},
{
"month": "March",
"month_number": 3,
"value": 4.1326
},
{
"month": "April",
"month_number": 4,
"value": 5.3237
},
{
"month": "May",
"month_number": 5,
"value": 5.9662
},
{
"month": "June",
"month_number": 6,
"value": 6.4582
},
{
"month": "July",
"month_number": 7,
"value": 6.2962
},
{
"month": "August",
"month_number": 8,
"value": 5.6009
},
{
"month": "September",
"month_number": 9,
"value": 4.5998
},
{
"month": "October",
"month_number": 10,
"value": 3.4805
},
{
"month": "November",
"month_number": 11,
"value": 2.5493
},
{
"month": "December",
"month_number": 12,
"value": 1.9721
}
]
}
],
"latitude_max": 38.0,
"latitude_min": 36.0,
"longitude_max": -75.0,
"longitude_min": -77.0,
"maximum": 4.3121,
"minimum": 4.307,
"name": "All Sky Surface Shortwave Downward Irradiance",
"notes": [
"The requested parameters are retrieved from a pre-computed climatological period (January 2001 - December 2025)"
],
"parameter": "ALLSKY_SFC_SW_DWN",
"point_count": 2,
"service": "POWER Climatology API v2.10.1",
"sources": [
"SYN1DEG"
],
"start_year": 2001,
"unit_system": "metric",
"units": "kW-hr/m^2/day"
}Get regional daily data
Get day by day values of one parameter for every cell of NASA's grid in a region 2 to 10 degrees across, such as a state's temperatures. Up to 31 days per step, to keep the result a usable size. Each grid cell comes back with its location, elevation, a row per day and its average, minimum and maximum, plus figures for the whole region. No API key required.
Inputs
- Southern edge (latitude)
latitude_minnumberRequired - The region's southern edge, from -90 to 90. The region must be 2 to 10 degrees from south to north.From -90 to 90.
- Northern edge (latitude)
latitude_maxnumberRequired - The region's northern edge, from -90 to 90.From -90 to 90.
- Western edge (longitude)
longitude_minnumberRequired - The region's western edge, from -180 to 180. The region must be 2 to 10 degrees from west to east.From -180 to 180.
- Eastern edge (longitude)
longitude_maxnumberRequired - The region's eastern edge, from -180 to 180.From -180 to 180.
- Parameter
parametertextRequired - The one parameter to get for the region (NASA takes one at a time). Pick it from the list, or give a code such as T2M.
- Start date
start_datedateRequired - The first day, from 1 January 1981.
- End date
end_datedateRequired - The last day, at most 31 days after the start.
- Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Time standard
time_standardtext - The clock the days and hours follow: local solar time (noon is when the sun is highest, which can differ from the local time zone) or UTC. Local solar time if left empty.One of:
LST(Local solar time (the sun's clock at that longitude)),UTC. Default:LST. - Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric.
Outputs
averagenumber- The average daily value across the region.
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
end_datetext- The last day asked for, as YYYY-MM-DD.
grid_pointslist- One entry per cell of NASA's grid inside the region (half a degree for weather, one degree for solar), north to south then west to east.
latitude_maxnumber- The northern edge of the region.
latitude_minnumber- The southern edge of the region.
longitude_maxnumber- The eastern edge of the region.
longitude_minnumber- The western edge of the region.
maximumnumber- The highest daily value in the region.
minimumnumber- The lowest daily value in the region.
nametext- The parameter's name, such as Temperature at 2 Meters.
noteslist- NASA POWER's own notes on the answer, such as the period a climatology covers or the surface a corrected wind speed used.
parametertext- The parameter's code, such as T2M, as every parameter field takes it.
point_countnumber- How many grid cells there are.
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
sourceslist- The data sets the values come from, such as MERRA2 (weather) and SYN1DEG (satellite solar).
start_datetext- The first day asked for, as YYYY-MM-DD.
time_standardtext- LST (local solar time, the sun's own clock at that longitude) or UTC: the clock the dates and hours follow.
unit_systemtext- metric or imperial: the unit system the values are in.
unitstext- The parameter's units, such as C, mm/day or kW-hr/m^2/day.
Example output
{
"average": 27.925,
"community": "RE",
"end_date": "2025-07-03",
"grid_points": [
{
"average": 27.73,
"elevation_m": 24.8,
"latitude": 38.0,
"longitude": -76.875,
"maximum": 29.33,
"minimum": 26.35,
"missing": 0,
"values": [
{
"date": "2025-07-01",
"value": 29.33
},
{
"date": "2025-07-02",
"value": 26.35
},
{
"date": "2025-07-03",
"value": 27.51
}
]
},
{
"average": 28.12,
"elevation_m": 6.46,
"latitude": 38.0,
"longitude": -76.25,
"maximum": 29.66,
"minimum": 26.34,
"missing": 0,
"values": [
{
"date": "2025-07-01",
"value": 29.66
},
{
"date": "2025-07-02",
"value": 26.34
},
{
"date": "2025-07-03",
"value": 28.36
}
]
}
],
"latitude_max": 38.0,
"latitude_min": 36.0,
"longitude_max": -75.0,
"longitude_min": -77.0,
"maximum": 29.66,
"minimum": 26.34,
"name": "Temperature at 2 Meters",
"notes": [],
"parameter": "T2M",
"point_count": 2,
"service": "POWER Daily API v2.10.0",
"sources": [
"MERRA2"
],
"start_date": "2025-07-01",
"time_standard": "LST",
"unit_system": "metric",
"units": "C"
}Get regional monthly data
Get month by month values, with a figure for each year, of one parameter for every cell of NASA's grid in a region 2 to 10 degrees across. Up to 3 years per step, to keep the result a usable size. Each grid cell comes back with its location, elevation, its rows and its average, minimum and maximum. No API key required.
Inputs
- Southern edge (latitude)
latitude_minnumberRequired - The region's southern edge, from -90 to 90. The region must be 2 to 10 degrees from south to north.From -90 to 90.
- Northern edge (latitude)
latitude_maxnumberRequired - The region's northern edge, from -90 to 90.From -90 to 90.
- Western edge (longitude)
longitude_minnumberRequired - The region's western edge, from -180 to 180. The region must be 2 to 10 degrees from west to east.From -180 to 180.
- Eastern edge (longitude)
longitude_maxnumberRequired - The region's eastern edge, from -180 to 180.From -180 to 180.
- Parameter
parametertextRequired - The one parameter to get for the region (NASA takes one at a time). Pick it from the list, or give a code such as T2M.
- Start year
start_yearnumberRequired - The first year, from 1981.From 1981 to 2026.
- End year
end_yearnumberRequired - The last year, at most 2 years after the start.From 1981 to 2026.
- Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric.
Outputs
averagenumber- The average monthly value across the region.
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
end_yearnumber- The last year asked for.
grid_pointslist- One entry per cell of NASA's grid inside the region (half a degree for weather, one degree for solar), north to south then west to east.
latitude_maxnumber- The northern edge of the region.
latitude_minnumber- The southern edge of the region.
longitude_maxnumber- The eastern edge of the region.
longitude_minnumber- The western edge of the region.
maximumnumber- The highest monthly value in the region.
minimumnumber- The lowest monthly value in the region.
nametext- The parameter's name, such as Temperature at 2 Meters.
noteslist- NASA POWER's own notes on the answer, such as the period a climatology covers or the surface a corrected wind speed used.
parametertext- The parameter's code, such as T2M, as every parameter field takes it.
point_countnumber- How many grid cells there are.
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
sourceslist- The data sets the values come from, such as MERRA2 (weather) and SYN1DEG (satellite solar).
start_yearnumber- The first year asked for.
unit_systemtext- metric or imperial: the unit system the values are in.
unitstext- The parameter's units, such as C, mm/day or kW-hr/m^2/day.
Example output
{
"average": 2.4733,
"community": "AG",
"end_year": 2024,
"grid_points": [
{
"annual": [
{
"value": 2.53,
"year": 2024
}
],
"average": 2.5183,
"elevation_m": 24.8,
"latitude": 38.0,
"longitude": -76.875,
"maximum": 5.57,
"minimum": 0.31,
"missing": 0,
"values": [
{
"month": "2024-01",
"value": 4.56
},
{
"month": "2024-02",
"value": 1.77
},
{
"month": "2024-03",
"value": 5.57
},
{
"month": "2024-04",
"value": 1.29
},
{
"month": "2024-05",
"value": 3.27
},
{
"month": "2024-06",
"value": 1.19
},
{
"month": "2024-07",
"value": 3.54
},
{
"month": "2024-08",
"value": 2.81
},
{
"month": "2024-09",
"value": 2.57
},
{
"month": "2024-10",
"value": 0.31
},
{
"month": "2024-11",
"value": 1.58
},
{
"month": "2024-12",
"value": 1.76
}
]
},
{
"annual": [
{
"value": 2.44,
"year": 2024
}
],
"average": 2.4283,
"elevation_m": 6.46,
"latitude": 38.0,
"longitude": -76.25,
"maximum": 6.36,
"minimum": 0.12,
"missing": 0,
"values": [
{
"month": "2024-01",
"value": 4.04
},
{
"month": "2024-02",
"value": 1.85
},
{
"month": "2024-03",
"value": 6.36
},
{
"month": "2024-04",
"value": 1.04
},
{
"month": "2024-05",
"value": 2.63
},
{
"month": "2024-06",
"value": 1.76
},
{
"month": "2024-07",
"value": 3.73
},
{
"month": "2024-08",
"value": 2.02
},
{
"month": "2024-09",
"value": 2.16
},
{
"month": "2024-10",
"value": 0.12
},
{
"month": "2024-11",
"value": 1.56
},
{
"month": "2024-12",
"value": 1.87
}
]
}
],
"latitude_max": 38.0,
"latitude_min": 36.0,
"longitude_max": -75.0,
"longitude_min": -77.0,
"maximum": 6.36,
"minimum": 0.12,
"name": "Precipitation Corrected",
"notes": [],
"parameter": "PRECTOTCORR",
"point_count": 2,
"service": "POWER Monthly and Annual API v2.10.0",
"sources": [
"MERRA2"
],
"start_year": 2024,
"unit_system": "metric",
"units": "mm/day"
}Get wind rose
Get a wind rose for a place and period, at 10 m and 50 m above the ground: how often the wind blows from each of 16 directions, its average speed from each, and how the time splits across 10 speed classes, plus the prevailing direction. Useful for siting wind turbines, runways and buildings. Any period from 1981. No API key required.
Inputs
- Latitude
latitudenumberRequired - How far north (positive) or south (negative) of the equator, from -90 to 90. For example 37.08 for Hampton, Virginia.From -90 to 90.
- Longitude
longitudenumberRequired - How far east (positive) or west (negative) of Greenwich, from -180 to 180. For example -76.35 for Hampton, Virginia.From -180 to 180.
- Start date
start_datedateRequired - The first day, from 1 January 1981.
- End date
end_datedateRequired - The last day. Any length of period works.
- Units
unitstext - Metric or imperial (US) units. Metric if left empty.One of:
metric(Metric (C, m/s, mm)),imperial(Imperial (F, mph, inches)). Default:metric. - Time standard
time_standardtext - The clock the days and hours follow: local solar time (noon is when the sun is highest, which can differ from the local time zone) or UTC. Local solar time if left empty.One of:
LST(Local solar time (the sun's clock at that longitude)),UTC. Default:LST.
Outputs
elevation_mnumber- The ground height of NASA's grid cell at that point, in metres above sea level.
end_datetext- The last day asked for, as YYYY-MM-DD.
heightslist- One wind rose per height above the ground: 10 m and 50 m.
latitudenumber- The latitude asked about, in decimal degrees (north is positive).
longitudenumber- The longitude asked about, in decimal degrees (east is positive).
servicetext- The NASA POWER service and version that answered, such as POWER Daily API v2.10.0. NASA asks for it in any reference to the data.
speed_unitstext- The units of the wind speeds, m/s or mph.
start_datetext- The first day asked for, as YYYY-MM-DD.
time_standardtext- LST (local solar time, the sun's own clock at that longitude) or UTC: the clock the dates and hours follow.
unit_systemtext- metric or imperial: the unit system the values are in.
Example output
{
"elevation_m": 6.58,
"end_date": "2025-01-31",
"heights": [
{
"average_speed": 4.64,
"directions": [
{
"average_speed": 5.42,
"degrees": 292.5,
"direction": "WNW",
"percent": 19.35,
"range": "281.25-303.75 degrees",
"speed_classes": [
{
"percent": 0.0,
"speed_class": 1,
"speed_range": "0-1.5 m/s"
},
{
"percent": 3.23,
"speed_class": 2,
"speed_range": "1.5-3.0 m/s"
},
{
"percent": 3.23,
"speed_class": 3,
"speed_range": "3.0-4.4 m/s"
},
{
"percent": 0.0,
"speed_class": 4,
"speed_range": "4.4-5.1 m/s"
},
{
"percent": 3.23,
"speed_class": 5,
"speed_range": "5.1-5.6 m/s"
},
{
"percent": 3.23,
"speed_class": 6,
"speed_range": "5.6-6.0 m/s"
},
{
"percent": 0.0,
"speed_class": 7,
"speed_range": "6.0-6.4 m/s"
},
{
"percent": 0.0,
"speed_class": 8,
"speed_range": "6.4-7.0 m/s"
},
{
"percent": 6.45,
"speed_class": 9,
"speed_range": "7.0-9.4 m/s"
},
{
"percent": 0.0,
"speed_class": 10,
"speed_range": "9.4+ m/s"
}
]
},
{
"average_speed": 4.64,
"degrees": 315.0,
"direction": "NW",
"percent": 32.26,
"range": "303.75-326.25 degrees",
"speed_classes": [
{
"percent": 3.23,
"speed_class": 1,
"speed_range": "0-1.5 m/s"
},
{
"percent": 6.45,
"speed_class": 2,
"speed_range": "1.5-3.0 m/s"
},
{
"percent": 9.68,
"speed_class": 3,
"speed_range": "3.0-4.4 m/s"
},
{
"percent": 0.0,
"speed_class": 4,
"speed_range": "4.4-5.1 m/s"
},
{
"percent": 0.0,
"speed_class": 5,
"speed_range": "5.1-5.6 m/s"
},
{
"percent": 0.0,
"speed_class": 6,
"speed_range": "5.6-6.0 m/s"
},
{
"percent": 3.23,
"speed_class": 7,
"speed_range": "6.0-6.4 m/s"
},
{
"percent": 3.23,
"speed_class": 8,
"speed_range": "6.4-7.0 m/s"
},
{
"percent": 6.45,
"speed_class": 9,
"speed_range": "7.0-9.4 m/s"
},
{
"percent": 0.0,
"speed_class": 10,
"speed_range": "9.4+ m/s"
}
]
}
],
"height_m": 10,
"prevailing_direction": "NW",
"prevailing_direction_degrees": 315.0,
"prevailing_direction_percent": 32.26,
"speed_classes": [
{
"percent": 6.46,
"speed_class": 1,
"speed_range": "0-1.5 m/s"
},
{
"percent": 16.14,
"speed_class": 2,
"speed_range": "1.5-3.0 m/s"
},
{
"percent": 25.82,
"speed_class": 3,
"speed_range": "3.0-4.4 m/s"
},
{
"percent": 3.23,
"speed_class": 4,
"speed_range": "4.4-5.1 m/s"
},
{
"percent": 12.92,
"speed_class": 5,
"speed_range": "5.1-5.6 m/s"
},
{
"percent": 12.91,
"speed_class": 6,
"speed_range": "5.6-6.0 m/s"
},
{
"percent": 6.46,
"speed_class": 7,
"speed_range": "6.0-6.4 m/s"
},
{
"percent": 3.23,
"speed_class": 8,
"speed_range": "6.4-7.0 m/s"
},
{
"percent": 12.9,
"speed_class": 9,
"speed_range": "7.0-9.4 m/s"
},
{
"percent": 0.0,
"speed_class": 10,
"speed_range": "9.4+ m/s"
}
]
}
],
"latitude": 37.08,
"longitude": -76.35,
"service": "POWER Wind Rose API v2.9.1",
"speed_units": "m/s",
"start_date": "2025-01-01",
"time_standard": "LST",
"unit_system": "metric"
}List parameters
List the parameters NASA POWER has for a time step and community (about 150 daily ones: temperatures, sunlight, rain, wind, humidity, soil moisture and more), each with its code, units, group and definition. Narrow it to some text or to the commonly used ones. The codes are what the data actions take. No API key required.
Inputs
- Time step
time_steptext - Which data the parameters are for. Daily if left empty.One of:
hourly,daily,monthly(Monthly and yearly),climatology(Climatology (long-term monthly averages)). Default:daily. - Community
communitytext - Which of NASA's user communities to answer for. It sets the units, most of all for sunlight, and fills the Parameters list. Renewable Energy if left empty.One of:
RE(Renewable Energy (sunlight in kWh/m² per day)),AG(Agroclimatology (sunlight in MJ/m² per day)),SB(Sustainable Buildings (sunlight in W/m²)). Default:RE. - Contains
searchtext - Only parameters whose code, name or definition contains this text, in any letter case, such as wind or solar.
- Commonly used only
common_onlytrue/false - Only the parameters NASA features in groups (such as Solar Fluxes and Related, or Wind/Pressure), about 40 per time step.Default:
false. - Include hour of day breakdowns
include_hour_by_hourtrue/false - Also list the monthly and climatology parameters that give a value for each hour of the day (over a thousand).Only when Time step is Monthly and yearly or Climatology (long-term monthly averages). Default:
false.
Outputs
common_onlytrue/false- True when only NASA's featured parameters (the ones its data viewer shows in groups) were listed.
communitytext- The user community the units follow: RE (Renewable Energy), AG (Agroclimatology) or SB (Sustainable Buildings).
countnumber- How many parameters are listed.
parameterslist- The parameters, in alphabetical order of name.
searchtext- The text the list was narrowed to, if any.
time_steptext- The time step listed: hourly, daily, monthly or climatology.
total_availablenumber- How many parameters this time step and community have in all.
Example output
{
"common_only": true,
"community": "RE",
"count": 7,
"parameters": [
{
"category": "Meteorology",
"code": "T2MDEW",
"definition": "The dew/frost point temperature at 2 meters above the surface of the earth.",
"group": "Temperatures",
"name": "Dew/Frost Point at 2 Meters",
"units": "C"
},
{
"category": "Meteorology",
"code": "TS",
"definition": "The average temperature at the earth's surface.",
"group": "Temperatures",
"name": "Earth Skin Temperature",
"units": "C"
},
{
"category": "Meteorology",
"code": "T2M",
"definition": "The average air (dry bulb) temperature at 2 meters above the surface of the earth.",
"group": "Temperatures",
"name": "Temperature at 2 Meters",
"units": "C"
},
{
"category": "Meteorology",
"code": "T2M_MAX",
"definition": "The maximum hourly air (dry bulb) temperature at 2 meters above the surface of the earth in the period of interest.",
"group": "Temperatures",
"name": "Temperature at 2 Meters Maximum",
"units": "C"
},
{
"category": "Meteorology",
"code": "T2M_MIN",
"definition": "The minimum hourly air (dry bulb) temperature at 2 meters above the surface of the earth in the period of interest.",
"group": "Temperatures",
"name": "Temperature at 2 Meters Minimum",
"units": "C"
},
{
"category": "Meteorology",
"code": "T2M_RANGE",
"definition": "The difference between the minimum and maximum hourly air (dry bulb) temperature at 2 meters above the surface of the earth in the period of interest.",
"group": "Temperatures",
"name": "Temperature at 2 Meters Range",
"units": "C"
},
{
"category": "Meteorology",
"code": "T2MWET",
"definition": "The adiabatic saturation temperature which can be measured by a thermometer covered in a water-soaked cloth over which air is passed at 2 meters above the surface of the earth.",
"group": "Temperatures",
"name": "Wet Bulb Temperature at 2 Meters",
"units": "C"
}
],
"search": "temperature",
"time_step": "daily",
"total_available": 152
}